Twitter
Facebook
NMT Wiki
Search
Member List
HelpFirmware: 
A-400 [13 May 2013] | C-300 [30 Nov. 2012] | A-300 [30 Nov. 2012] | C-200 [21 Jan. 2013] | A-200/A-210 [10 Aug. 2012]
| Thread Review (Newest First) |
| Posted by UbU - 05-10-2013 07:56 AM |
| As I said before, I've got no issues till now and there is no differnce (i don't see one) in the video quality. I've paid about 60$ for my setup with R-Pi. So if any ubeatable problems appear (like unstability of 1GBit ethernet connection or unacceptable performance of nmj in A-210 /about 400$ for a-200 upgraded to a-210 chasis/), I will replace it with another setup. But I'm sure, that it will be based on XBMC@htpc. |
| Posted by Willem53 - 05-10-2013 04:39 AM |
|
try high bitrate 1080p with true audio or DTS-MA and compare picture quality... I got an android phone that plays every file in my library also also but it doesn't look the same.... |
| Posted by UbU - 05-09-2013 10:57 PM |
(05-08-2013 11:52 AM)Willem53 Wrote: Raspberry Pi and HD video/audio..... good luck.. Xbmc@R-Pi plays every file in my library (different formats including 1080p) just A-210 did. Support (open elec, xbmc) is much better. Xbmc is an outstanding media center solution. Popcorn will never reach this level. |
| Posted by Willem53 - 05-08-2013 11:52 AM |
| Raspberry Pi and HD video/audio..... good luck.. |
| Posted by ophidian - 05-08-2013 11:49 AM |
(05-08-2013 08:01 AM)UbU Wrote:(04-21-2013 05:51 PM)Scorpys Wrote: c200/a200 ,a300/c300 is stopped donc wait any news firmware sabyas works only on A400 I second that. After all the firmware mess I've had (while doing the instructions provided here on the forum) i decided to look to xbmc with some compatible hardware instead. I used to recommend it (hdx 1000). Nowadays is a lot different. (a210) |
| Posted by UbU - 05-08-2013 08:01 AM |
(04-21-2013 05:51 PM)Scorpys Wrote: c200/a200 ,a300/c300 is stopped donc wait any news firmware sabyas works only on A400 Good bye Popcorn, welcome Raspberry Pi... |
| Posted by fairyjo - 05-03-2013 08:36 PM |
(05-01-2013 05:35 AM)Willem53 Wrote: check the root for a DVD/BD folder I think there is something in the root it tries to autostart.. I couldn't find anything like you said but I found the media folder. I decided to empty it and I was right. When I went back to NMJ, it could update the database from scratch and regenerated all of my series and movies as I wanted to do. So it's all right. Thanks a lot for your help. |
| Posted by Willem53 - 05-01-2013 05:35 AM |
| check the root for a DVD/BD folder I think there is something in the root it tries to autostart.. |
| Posted by fairyjo - 04-30-2013 02:16 PM |
(04-30-2013 10:08 AM)Willem53 Wrote: So what happens if you press continue? Hi Willem53, if I press Continue, it goes back to the File mode, if I press Retry it gives me the same message again and again... In the maintenance all apps are running. But I don't know if that's one from the maintenance or if it's a separate app, in that case it's wouldn't be running as I don't use the Apps section. |
| Posted by Willem53 - 04-30-2013 10:08 AM |
|
So what happens if you press continue? Do you run CSI apps? |
| Posted by fairyjo - 04-30-2013 05:54 AM |
(04-29-2013 03:41 PM)Willem53 Wrote: and did you check for updates on the NMT applications? Hello Willem53, thanks for your reply. I'm not using the applications, I'm only using NMJ for movies and series. I have not seen anyway to update it though now I don't have access to it anymore. How do I update it? Thanks for your help, sincerely, Joanie |
| Posted by Willem53 - 04-29-2013 03:41 PM |
| and did you check for updates on the NMT applications? |
| Posted by fairyjo - 04-27-2013 08:26 PM |
|
Hello, I updated with the new firmware this week but the NMJ does not update, show or refresh anymore ever since, instead I get the following message "An error has occurred, your requests cannot be processed" with two buttons: Retry or Continue I can see the image with the refresh button behind this error message but when I hit Retry I only get this message again, I tried many times and nothing works. Today I tried to reset to factory settings, but that didn't help, I still get the same error message. I also connected the NMT to my computer and checked the drive via Gparted live and reset the factory setting again, nothing worked and the same error keeps showing. Could you please help me? I would be very grateful, with kind regards, Joanie Edit: I forgot to mention that I updated the firmware directly via my Popcorn Hour A210, on the maintenance tab. |
| Posted by Scorpys - 04-21-2013 05:51 PM |
| c200/a200 ,a300/c300 is stopped donc wait any news firmware sabyas works only on A400 |
| Posted by gedror - 04-21-2013 01:40 PM |
(04-13-2013 09:04 PM)leecher2 Wrote: Is A2x0 support officially discontinued? 
|
| This thread has more than 15 replies. Read the whole thread. |