+- Networked Media Tank (http://www.networkedmediatank.com)
+-- Forum: NMT Software & Settings (/forumdisplay.php?fid=19)
+--- Forum: Torrent and Usenet (/forumdisplay.php?fid=64)
+--- Thread: [nzbget] NZBget 0.7.0 download and discussion (/showthread.php?tid=19465)
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - toker-a110 - 03-29-2009 11:33 PM
Running your latest build, NZbget crashed after about 5 hours of dowloads. Could not restart NZBget from TV Web interface or command line. Had to reset the PCH.
I am not using SSL and only 6 connections, my conf has been running for 3 weeks with any issues until the update via CSI and now I am running your latest build. Both doing the same thing, crashing after a few hours, the connection speed is consistent at 1400KB/s.
NZBget web interface refreshes to files download page and you often have to click 'groups' to return to the main screen. My unpacking has suddenly not deleting samples after the upgrade.
I originally thought that all was well with the upgrade but it not.
May revert to previous version.
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - Ger Teunis - 03-30-2009 08:42 AM
Could anybody test the official mipsel release?
I am suspecting that my build tool are doing something wrong here.
Download the official nzbget here:
http://downloads.sourceforge.net/nzbget/nzbget-0.6.0-bin-nmt-mipsel.tar.gz?use_mirror=surfnet
After replacing the binary please remove any download and connection limit.
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - toker-a110 - 03-30-2009 11:30 AM
All
I am now running NZBget 0.6.0-r291 for MIPSEL, although the NZBget web interface say uptime '1:12:13' even tho its been running all night and downloading all night. I have queued up 50GB worth of downloads to test and its 30% through, the PCH is still up.
If NZBget 0.6.0-r291 completes all my downloads then I am stick with this version. I have also tried the Official Final 0.6.0 and after about 2 hours, I get connection socket errors. Eventually, it runs out of sockets and the application crashes taking PCH with it. Had to do a reset of the PCH as it was frozen.
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - Ger Teunis - 03-30-2009 11:47 AM
(03-30-2009 11:30 AM)toker-a110 Wrote: All
I am now running NZBget 0.6.0-r291 for MIPSEL, although the NZBget web interface say uptime '1:12:13' even tho its been running all night and downloading all night. I have queued up 50GB worth of downloads to test and its 30% through, the PCH is still up.
If NZBget 0.6.0-r291 completes all my downloads then I am stick with this version. I have also tried the Official Final 0.6.0 and after about 2 hours, I get connection socket errors. Eventually, it runs out of sockets and the application crashes taking PCH with it. Had to do a reset of the PCH as it was frozen.
Interesting, you saw that no tcp connections could be made just before the the PCH frooze?
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - toker-a110 - 03-30-2009 01:10 PM
The Official version NZBget 0.6.0 starts OK and download at 1400KB/s (6 connections) after a while it starts losing connections and you can see that 6 connections becames 5 then 4 then 3...... . Hence, my 'socket errors' and the download speed drops. Eventually, it runs out of sockets or the application can not obtain any more resources and crashes. The PCH then does not respond, I have to do a reset.
NZBget 0.6.0-r291 does not seem do this, tho I havent tested it long enough yet.
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - Ger Teunis - 03-30-2009 01:15 PM
The official build by me (in CSI or download from firstpost) or did you download the binary from the nzbget site yourself?
I am getting the suspicion that my build environment is the cause of these problems.
(03-30-2009 01:10 PM)toker-a110 Wrote: The Official version NZBget 0.6.0 starts OK and download at 1400KB/s (6 connections) after a while it starts losing connections and you can see that 6 connections becames 5 then 4 then 3...... . Hence, my 'socket errors' and the download speed drops. Eventually, it runs out of sockets or the application can not obtain any more resources and crashes. The PCH then does not respond, I have to do a reset.
NZBget 0.6.0-r291 does not seem do this, tho I havent tested it long enough yet.
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - toker-a110 - 03-30-2009 01:35 PM
My first upgrade to 0.6.0 was through CSI, all seems OK until about 3 hours into it. NZBget would crash after a period of time and only after downloading.
Second time, I used your new build from the post above and it did the same thing. Now running 0.6.0 r291 downloaded from the sourceforge directly. So far NZBget is still running and downloading after about 10 hours. I am not sure if its the same instance running as the uptime on NZBget Web Interface says '1:45:00' 1 hour 45 mins of uptime where as its been running for over 10 hours.
Not sure how I would check if its the same instance or the apps had crashed then restarted itself.
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - toker-a110 - 03-31-2009 12:23 PM
Just an update. The downloaded version (0.6.0 update) from sourceforge still crashed but it restarts itself. I dont have problems with that as long it completes my downloads
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - Ger Teunis - 03-31-2009 12:27 PM
(03-31-2009 12:23 PM)toker-a110 Wrote: Just an update. The downloaded version (0.6.0 update) from sourceforge still crashed but it restarts itself. I dont have problems with that as long it completes my downloads
And the binary I posted in comment 17?
http://www.networkedmediatank.com/showthread.php?tid=19465&pid=167962#pid167962
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - toker-a110 - 03-31-2009 01:52 PM
No, the official downloaded version from Sourceforge. The app crashed after several hours but it restarts itself.
Your build in comment 17 also crashes but doesnt restart itself.
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - Ger Teunis - 03-31-2009 10:12 PM
(03-31-2009 01:52 PM)toker-a110 Wrote: No, the official downloaded version from Sourceforge. The app crashed after several hours but it restarts itself.
Your build in comment 17 also crashes but doesnt restart itself.
Sorry I have to say this: I am glad. I was really starting to second guess my build environment: that is not good. Sorry to hear that it is not working out for you though.
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - BrEEdAA - 04-01-2009 07:14 PM
Im also getting the crashing errors. Was previoulsy running the last test version on the community installer with no issues.
Upgraded to latest version also via community installer. Seems to run ok for a couple of hours then hangs the PCH
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - Ger Teunis - 04-01-2009 08:45 PM
(04-01-2009 07:14 PM)BrEEdAA Wrote: Im also getting the crashing errors. Was previoulsy running the last test version on the community installer with no issues.
Upgraded to latest version also via community installer. Seems to run ok for a couple of hours then hangs the PCH
I've made the test version available again as an alternative to the 0.6.0 release. For anyone wanting to revert back to this version, there aren't back enhancements between test2 and the final.
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - BrEEdAA - 04-02-2009 01:27 PM
Thanks dude, will see how it goes and revert back if still crashing
RE: [nzbget] NZBget 0.6.0 FINAL + nzbget webinterface 1.3 - jcarranco - 04-03-2009 11:45 AM
Can't the NZBget 0.6.0 Final version automatically delete the rar files after unpacking? I find it tedious having to go in there everytime and delete all rar files after its done processing.