sickbeard + nzbget issues - Printable Version
+- Networked Media Tank (http://www.networkedmediatank.com)
+-- Forum: NMT Software & Settings (/forumdisplay.php?fid=19)
+--- Forum: Torrent and Usenet (/forumdisplay.php?fid=64)
+--- Thread: sickbeard + nzbget issues (/showthread.php?tid=62235)
sickbeard + nzbget issues - Lacroix - 07-22-2012 05:45 PM
I'm trying to install and setup sickbeard and nzbget on my a300, but am running into issues.
By default, nzbget 0.6 is installed on the pch, correct?
Then I installed "local 0.1.8", and "sickbeard 1.0" using the CSI.
After this I set up both sickbeard and nzbget 0.6.
Then I added shows to sickbeard and sickbeard would send the nzb to nzbget, here I would get error messages.
In sickbeard: "NZBget could not add
In nzbget 0.6: "error parsing nzb", and no further info
After searching a bit on google, I read that the parsing errors should be gone in a further version of nzbget, so I installed "nzbget 0.8-testing".
Afer this, sickbeard could succesfully send nzb's to nzbget, however I would receive a connection timeout from my newsserver.
When I had installed nzbget 0.6, I setup my newsserver correctly and testing this by uploading an nzbfile.
After upgrading to nzbget 0.8, the settings would still be the same, however when I upload an nzb file, I get the same connection timeout.
The error says my newsserver is "my1.newsserver.com", but my settings page tells me I have setup the correct one. (only 1 server).
Then, when I try to set the newsserver again, in nzbget 0.8, and restart after saving my changes, by nzbget version is back to 0.6, so I get the parsing error again.
Can someone tell me what I'm doing wrong?
RE: sickbeard + nzbget issues - NaaN - 07-29-2012 11:34 AM
To connect to NZBget 0.8 you have to use http://ip-to-your-popcorn:9999/NZBget_web/ and change the config there.
I'm guessing you're till trying to use http://ip-to-your-popcorn:8066 to connect NZBget.
RE: sickbeard + nzbget issues - Anoniemisookgoed - 10-15-2012 10:43 PM
I set up Sickbeard 1.0 and Local 0.1.8-nmt2 on my PCH A300.
Now im trying to make it work with NZBget 0.7.0-testing-r380.
I set up my newsserver and resetted NZBget as well as the whole PCH.
The only message I get is:
ERROR: NZBGetWeb could not connect to NZBGet-Server.
Possible reasons include:
NZBGet-Server is not running (start);
IP/Port-settings are incorrect. Check config;
Firewall is not properly configured (if nzbget-server and web-interface run on different computer).
Error-message reported by OS: Connection refused (146)
Option 1 was to check if the server was running. I clicked on start and NZBget gave me feedback:
INFO: Server started successfully.
Please give the server few seconds for initialization, then refresh the page.
So I refreshed, but the problem stayed. Also according to CSI NZBget is running.
Option 2 was checking the config if the IP/Port-settings are incorrect.
The IP of my PCH is 192.168.0.17, so thats correct. The port I don't know? NZBget suggests 6789, but I don't know how to check that?
Option 3 was to check the firewall. Well, I never have to set any Firewall settings and I don't think this is the problem here.
Can anyone help me out? Thnx!
Ok, I set the COMMUNICATION WITH NZBGET-SERVER (under WEB-INTERFACE) to IP 0.0.0.0
And CLIENT/SERVER COMMUNICATION (under NZBGET-SERVER) also to IP 0.0.0.0 (the info said "If you want the server to listen to all interfaces, use "0.0.0.0"., so I gave that a try..)
Port settings both on 6789
Now this error is gone, but the webinterface says:
Server is sleeping
INFO Mon, 15 Oct 2012 23:52:15 +0200 nzbget 0. 7. 0- testing- r380 daemon- mode
I guess this is a step in the right direction (?).
Now my next thing to fit is getting Sickbeard to work with NZBget.
Under Config > Search settings > NZB Search I used the following settings:
Checked Search NZB's
NZB Method = Black hole
NZB Black Hole = /share/.nzbget/nzb
I added new shows and I seems to work! Slow as hell (73 kb/s), but I can see some action in NZBget!
Note to self: "Good work "
RE: sickbeard + nzbget issues - jhmiller - 10-16-2012 01:11 AM
Server is sleeping means that its alive and waiting for an nzb so it can start downloading.
Should be faster then 73 kb/s try adding more connections, but keep an eye on performance of the player, too many will cause the NMT to stutter or even crash.
Well done (by the way)