[200/300] oPKG v0.1.8 - Updated on 21st Feb

[vaidyasr]

(02-22-2012 11:57 AM)TomdeAap Wrote:  Yeah that is what I meant, but expressed as a simple person . You rock, gonna try this tonight!

Please note, I haven't tried in my PCH, as I don't have a DVD/CD drive installed to test it. Please post issues and comments in this thread.

[rapsac13]

Dear vaidyasr,

I have installed the opkg via C.S.I. The installation itself did not give me any problems, however when I am entering the http://pch-c200:9999/local_web/ I am pressed an empty list.
So I assumed there most be something wrong I opened a telnet session and run the following (and got this):

sh-3.00# opkg update
opkg: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory

I am not sure if:

* This is dependency this is included / automatically downloaded on first use.
* This is dependency that I should have installed via other means.
* Or just an failure on my side.

I hope this question does not take to much of your time.

[TomdeAap]

(02-22-2012 07:23 PM)rapsac13 Wrote:  sh-3.00# opkg update
opkg: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory

I had the same, but for a different .so, cant remember which one. I went to yesterdays version. It works normally but if you just enter OPKG, it give a segfault.

[rapsac13]

not really for me, it always gives me the error regarding the shared libraries.

It might be a new feature on this version. Hopefully the author can provide feedback or if need request more logfiles (happy to supply them).

[jlauwers]

(02-22-2012 07:23 PM)rapsac13 Wrote:  sh-3.00# opkg update
opkg: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory

Exact same error here.
Downgraded to 0.1.8 nmt1 and it's working fine.
I have a PCH-C200 with nmt-apps on thumb drive.

[vaidyasr]

OK, thanks for the feedback. I'll release again with the missing libs as static, so it will not look for any shared libraries except the system one. I'll release in 2-3 hours.

[vaidyasr]

Update with a static one. Try again.

[rapsac13]

@work at the moment.

I Will try it today and post back the results.

[jlauwers]

It's working! Thank you!

Code:

sh-3.00# cat /share/Apps/local/appinfo.json
{
    ...
    version="0.1.8-nmt2",
    ...
}
sh-3.00# opkg update
Downloading http://sourceforge.net/projects/c200ipkg/files/Packages.
Updated list of available packages in /share/Apps/local/lib/opkg/lists/c200local.

[YousvanHalder]

Hello,

I installed CSI on my laptop and i installed Gaya and opkg and busybox and lundmanshell.
But when i try to access gaya or opkg it gives the error "request cannot be processed".
I searched the CSIthread for a solution but i can't find it.

What do i need to do

Greetings

[GMUGNIER]

(02-23-2012 06:34 PM)YousvanHalder Wrote:  Hello,

I installed CSI on my laptop and i installed Gaya and opkg and busybox and lundmanshell.
But when i try to access gaya or opkg it gives the error "request cannot be processed".
I searched the CSIthread for a solution but i can't find it.

What do i need to do

Greetings

I am having problems as well but with the Logitech Media Server - locking up my c200 - any one with ideas?

[rapsac13]

(02-23-2012 07:40 AM)vaidyasr Wrote:  Update with a static one. Try again.

Just to let you know, confirmed working!

Thank you.

[vaidyasr]

(02-23-2012 06:34 PM)YousvanHalder Wrote:  Hello,

I installed CSI on my laptop and i installed Gaya and opkg and busybox and lundmanshell.
But when i try to access gaya or opkg it gives the error "request cannot be processed".
I searched the CSIthread for a solution but i can't find it.

What do i need to do

Greetings

I would like to know how you access opkg?. via TV screen?. the 'request cannot be processed' probably come if the webservices may be down. Try a reboot and try again.

[YousvanHalder]

I tried to access every CSI webservice but every time i get the error "request cannot be processed" on TV.
And i Have my FTP server running on my NMT and in CSI on my PC i put in my IP adress of the NMT, but it doesn't work .

Greets

[Emeka9]

Hello Vaidyasr,

I have just bought the Popcorn Hour A-210. I own Squeezebox Boom and Duet. I would love to run squeeze server from the Popcorn Hour. I am basically an illiterate with Linux but comfortable with Windows. Can you please guide me on how to install squeeze server unto Popcorn please. What's OPKG and how can I get started. Thanks.