[CSI] Community Software Installer 2.6.1 (OLD THREAD)

[bloodflower]

Ger Teunis

thanks for your reply.
in the CSI the description is:
"Will install smartmon tools, for S.M.A.R.T info on HDDs binaries will be installed in /share/.bin folder (next to busybox binaries)"
after install, i check the /share/.bin and /share/bin, both directories don't exist.
maybe it's installed elsewhere, i don't know where it is installed.

---

finally i find where it is installed.
it's installed in /share/Apps/Telnetd/bin
it's so deep,hehe, i don't know why it's installed in the telnetd directory.
thanks anyway.

[Ger Teunis]

(05-20-2009 02:09 PM)bloodflower Wrote:  Ger Teunis

thanks for your reply.
in the CSI the description is:
"Will install smartmon tools, for S.M.A.R.T info on HDDs binaries will be installed in /share/.bin folder (next to busybox binaries)"
after install, i check the /share/.bin and /share/bin, both directories don't exist.
maybe it's installed elsewhere, i don't know where it is installed.

---

finally i find where it is installed.
it's installed in /share/Apps/Telnetd/bin
it's so deep,hehe, i don't know why it's installed in the telnetd directory.
thanks anyway.

You're right. I'll update that package someday to the new format. It will then install the files in /bin

[booster]

Can I use CSI for installation apps. from WAN?
I have router with port-forward settings for FTP - WAN port 5521-> LAN port 21
Server settings in CSI - Server <WAN IP>:5521
Does CSI supports alternate port number in server name?
I see window with error - "Insallation failed, please check server settings..."

[Ger Teunis]

(05-20-2009 03:02 PM)booster Wrote:  Can I use CSI for installation apps. from WAN?
I have router with port-forward settings for FTP - WAN port 5521-> LAN port 21
Server settings in CSI - Server <WAN IP>:5521
Does CSI supports alternate port number in server name?
I see window with error - "Insallation failed, please check server settings..."

Currently no, could you make a issue for that? Sounds like a wanted feature. http://www.nmtinstaller.com/issues

Two ports have to be forwarded: one for the ftp server and one for the webserver (sybhttpd) which is used to start the installation process. Port 8883 off the top of my head.

[booster]

(05-20-2009 03:08 PM)Ger Teunis Wrote:  Currently no, could you make a issue for that? Sounds like a wanted feature. http://www.nmtinstaller.com/issues

Done.

(05-20-2009 03:08 PM)Ger Teunis Wrote:  Two ports have to be forwarded: one for the ftp server and one for the webserver (sybhttpd) which is used to start the installation process. Port 8883 off the top of my head.

Then it is necessary to specify two ports in options of a server: alternate FTP port and alternate web port.

[empatico]

(12-23-2008 04:30 PM)Ger Teunis Wrote:  Download
Download here. Version 2.1.0.0 is send to donators first, not available for download.
Donators get the advantage of using new versions first, they are contacted by mail with newer releases.

I agree with that. Donators deserve the right to have an incentive. But what about allowing maintainers and developers to download too? I mean, we also support the repository with our work. Also downloading newer versions allow us to test our packages better. This is a modest proposal, and should be understood like that. It's not a demand or such stuff. I really appreciate what are you doing and your amazing project.

Also I want to apologize for not updated aMule to the new format already. I'm being busy last weeks with my final career project. Anyway, I succeed updating amuled without problems, but I'm stuck with amuleweb. I can't force it to find the web templates at the new path.

By the way, let me post a message for the forum users:

Quote:If you can help me compiling aMule versions or updating aMule to the new CSI pakage, send me a PM or post at aMule threat http://www.networkedmediatank.com/showth...?tid=19905 because i only do that for you! I don't use aMule in my own PCH, because I prefer transmission and bittorrent network instead of aMule and ed2k network.

Finally, I want to ask to you for the vmware image build environment. It would help me a lot trying to compile aMule 2.2.4

Regards.

[SuperW2]

Maybe covered, but any reason that the "start, restart, and uninstall" buttons are all greyed out for every Apps, Themes, etc, etc?

I can connect to the PCH, but can't install anything with CSI.

[Ger Teunis]

(05-21-2009 02:14 AM)SuperW2 Wrote:  Maybe covered, but any reason that the "start, restart, and uninstall" buttons are all greyed out for every Apps, Themes, etc, etc?

I can connect to the PCH, but can't install anything with CSI.

They will only be enabled on installed applications of course, you cannot stop an non-installed application

You said you can't install anything, please download the Portable edition and post the content of ErrorLog.csv here (in code tags. the hash button when you create the post) after the installation error occurs again.

[Ger Teunis]

(05-21-2009 12:16 AM)empatico Wrote:  I agree with that. Donators deserve the right to have an incentive. But what about allowing maintainers and developers to download too?

Sending me a PM would also have done the trick
I've send you the download link, please contact me if you need any support at all for making amule compatible with the new CSI package format, it is really easy.

[Ger Teunis]

Download is now plublic
Also some small update, new version is 2.1.5.0.

Enjoy!

[Peppin]

Auto update to 2.1.5.0 went smooth and fast... props

[Ger Teunis]

(05-21-2009 05:26 PM)Peppin Wrote:  Auto update to 2.1.5.0 went smooth and fast... props

Great.

For the dutch viewers, this application has had some media attention.
The latest edition of the computer magazine Computer Totaal has a small article on CSI. Was very happy as you can imagine

[pac^man]

(05-21-2009 05:22 PM)Ger Teunis Wrote:  Download is now plublic
Also some small update, new version is 2.1.5.0.

Enjoy!

I've installed CSI 2.0.1 on my Powerbook G4 right now. I don't know where to download 2.1.5.0 for OSX

With 2.0.1 I have some problems, actually I can't use it at all on OSX:

I can connect to my HDX and see which packages are installed.
But whenever I try to install an app with CSI I get the spinning wheel of death and have to kill the process. It never comes to an end.

Also I have to enter the IP address and password every time I start CSI.

On my Windows laptop everything works fine.

Opening the firewall on OSX didn't help.
I have the newest version of mono (2.4_7) installed on OSX 10.5.7.

How can I find out what's wrong?

[Ger Teunis]

(05-21-2009 06:13 PM)pac^man Wrote:  I've installed CSI 2.0.1 on my Powerbook G4 right now. I don't know where to download 2.1.5.0 for OSX

With 2.0.1 I have some problems, actually I can't use it at all on OSX:

I can connect to my HDX and see which packages are installed.
But whenever I try to install an app with CSI I get the spinning wheel of death and have to kill the process. It never comes to an end.

Also I have to enter the IP address and password every time I start CSI.

On my Windows laptop everything works fine.

Opening the firewall on OSX didn't help.
I have the newest version of mono (2.4_7) installed on OSX 10.5.7.

How can I find out what's wrong?

That is a known issue of 2.0.1.
Version 2.1.5 should fix that. We'll have to wait for Lundman to create a new DMG package which contains the 2.1.5 version.

You could also download 2.1.5 portable edition and start "Start Linux.sh". First you need to set the execute bit on it.

[pac^man]

(05-21-2009 06:16 PM)Ger Teunis Wrote:  That is a known issue of 2.0.1.
Version 2.1.5 should fix that. We'll have to wait for Lundman to create a new DMG package which contains the 2.1.5 version.

You could also download 2.1.5 portable edition and start "Start Linux.sh". First you need to set the execute bit on it.

Ok, just did that. I had downloaded it already but as the file extension was .exe I didn't even try starting it.

The ftp settings are still gone after a restart.
But otherwise it works now, great!