B110 Motherboard layout

[tinners]

by any chance are the analogue ports removable on their own whilst leaving the optical ones ?
any chance someone could post a picture of the rear ports and how they fix to the board
i.e. the opposite direction to this
http://i158.photobucket.com/albums/t116/...utputs.jpg
I want to puit mine in this case but the analogue ports are too high
http://linitx.com/viewproduct.php?prodid=12041
thanks

[werner]

ok here please check out that Sheet i hope that is ok for all, if so we will add that into the package

regards werner

[tinners]

(09-10-2008 06:35 PM)werner Wrote:  ok here please check out that Sheet i hope that is ok for all, if so we will add that into the package

regards werner

Thats a great start.
Maybe just me being a bit picky but

• What is UART ?
• What is FIP ?
• I would have the 2 options for J31 & J44 on the same line rather than underneath each other
• I'd give the breakouts at the bottom of the page for 1, 3, 5, 6, 7, 11, 13 a title e.g. "front panel connectors", "cpu fan options" etc. to explain what they are
• a small description for why you'd want to use either of the 2 power options or fan options
  

Hope that helps but just this description sheet is a great step in the right direction thanks.

[alanh]

(09-10-2008 07:42 PM)tinners Wrote:  What is UART ?

RS-232 serial port

(09-10-2008 07:42 PM)tinners Wrote:  What is FIP ?

Future option, but I'm guessing the lines from the 8635 internal FIP hardware block that can be used to interface to a LED, LCD, or VFD display using a few supported NEC and PTC controller chips.

The LCD port I'm guessing is the 24-bit parallel digital video out (or 12-bit w/ DDR maybe). Though it's hard to trace anything on PCBs w/ BGAs.

Everything else looks pretty self explanatory to me.

[tinners]

(09-10-2008 09:58 PM)alanh Wrote:  

(09-10-2008 07:42 PM)tinners Wrote:  What is UART ?

RS-232 serial port

(09-10-2008 07:42 PM)tinners Wrote:  What is FIP ?

Future option, but I'm guessing the lines from the 8635 internal FIP hardware block that can be used to interface to a LED, LCD, or VFD display using a few supported NEC and PTC controller chips.
The LCD port I'm guessing is the 24-bit parallel digital video out (or 12-bit w/ DDR maybe). Though it's hard to trace anything on PCBs w/ BGAs.
Everything else looks pretty self explanatory to me.

thanks i erm yeah kind of knew most of it just was pointing out would be good for it to be explained in the instructions

[Dallassallad]

Thanks! Now I can plan the connectors/cables in detail while waiting for this to start selling in Sweden (might take a while).

[pastimer]

(09-10-2008 06:35 PM)werner Wrote:  ok here please check out that Sheet i hope that is ok for all, if so we will add that into the package

regards werner

Where is the internal infrared connector?

[pastimer]

(09-10-2008 07:42 PM)tinners Wrote:  [*]What is FIP ?

Just choose one of the following:

FIP Facility Improvement Program
FIP Facility Interface Processor
FIP Fact Issue Paper
FIP Factory Instrumentation Protocol
FIP Fail-In-Place
FIP Fair Information Practices
FIP Family Investment Program
FIP FASTbus Interconnect Panel (Newbridge)
FIP Fault Isolation Procedure
FIP FDDI Interface Processor
FIP Federación de Instituto Pastorales
FIP Federal Identity Program (Canadian)
FIP Federal Implementation Plan
FIP Federal Information Plan
FIP Federal Information Processing
FIP Fédération Internationale de Philately (French: International Federation of Philately)
FIP Fédération Internationale des Podologues
FIP Fédération Internationale Pharmaceutique (International Pharmaceutical Federation)
FIP Federazione Italiana Pallacanestro (Italian Basketball Federation)
FIP Feline Infectious Peritonitis
FIP Female Iron Pipe
FIP Fiber In-building Panel (ADC)
FIP Fiber Infrastructure Provider
FIP Field Inspection Procedure
FIP Fielding Independent Pitching (baseball statistic)
FIP File Processor Buffering
FIP Filmwriter Interface Processor
FIP Final Implementation Plan
FIP Finance Image Processor
FIP Financial Information Pointer
FIP FingerPost Information Processor
FIP Finite Intersection Property (space topology)
FIP Firearms Interest Police (Canadian Firearms Centre)
FIP Fitness Improvement Program (US Air Force)
FIP Fleet Innovation Project
FIP Fleet Introduction/Improvement/Isolation Program
FIP Flight Increment Plan
FIP Flight Instruction Program
FIP Fluorescent Indicator Panel
FIP Foam In Place
FIP Focus Integration Program (Intel)
FIP Forestry Incentives Program
FIP Foundation for Inner Peace
FIP France Inter Paris (radio station)
FIP Free Internet Press (news website)
FIP Fuel Injection Pump
FIP Fuerzas de Intervención Policial (Guatemala special task force)
FIP Full Intra-Pair (Spin-Coupling)
FIP Functional Implementation Plan
FIP Furniture, Inventory, and Purchasing
FIP Future Income Potential
FIP International Pharmaceutical Federation
FIP Factory Information Protocol
FIP Fast Ip

[BAM]

(08-21-2008 03:16 PM)daniel_owen_uk Wrote:  max doesn't matter, if it is capabable of supply 60watts then that's all you need, if you put in a 500w psu it would only draw 60, PSUs are labelled with the max output.

Don't forget though, if you did use a 500w PSU, and the B-110 is drawing 60w, you're probably still burning up around 120w at the power point because PSUs are quite ineffecient at low power usage. (I think even the 80%+ efficient PSUs only claim that at usage levels above 20% of rated capacity.)

So don't go bigger than you have to..

[alanh]

Bump. Can the PDF Werner made be posted in a sticky thread somewhere?

[werner]

the pdf should be in the package of B-110 it is an printed one

[daniel_owen_uk]

Could do with saying which audio out is l,r,c,rl,rr

[alanh]

(11-20-2008 04:11 PM)daniel_owen_uk Wrote:  Could do with saying which audio out is l,r,c,rl,rr

That is printed on the ATX connector plate - at least it is on mine anyway.

[svaneborg]

(09-10-2008 06:35 PM)werner Wrote:  ok here please check out that Sheet i hope that is ok for all, if so we will add that into the package

regards werner

Hi Werner...

Did I buy a product that was unfinished , when I purchased the B-110 motherboard or did popcornhour developers put it on the market in need of money issues developing the C-200 model, since you appearently have stoppped working on getting the b-110 finished.

Im still missing fix of the analog outputs (why put in on the motherboard if its not or never going to be used ???)

Copied in from .pdf ....

Note : LCD, FIP & mini-PCI WiFi modules will be available as upgrade options from Popcorn Hour in the future.

Absolutely nothing happend with these issues....and you have now stopped selling and producing the b-110.....

If your'e not going to finish this I will consider this as a question of fraud to your customers that have bought the product...

Regards
Svaneborg

[subpop]

I absolutely agree with Svaneborg.

I own a B-110 and I have the same impression of a not-finished product.

Subpop

(08-11-2009 11:47 AM)svaneborg Wrote:  Hi Werner...

Did I buy a product that was unfinished , when I purchased the B-110 motherboard or did popcornhour developers put it on the market in need of money issues developing the C-200 model, since you appearently have stoppped working on getting the b-110 finished.

Im still missing fix of the analog outputs (why put in on the motherboard if its not or never going to be used ???)

Copied in from .pdf ....

Note : LCD, FIP & mini-PCI WiFi modules will be available as upgrade options from Popcorn Hour in the future.

Absolutely nothing happend with these issues....and you have now stopped selling and producing the b-110.....

If your'e not going to finish this I will consider this as a question of fraud to your customers that have bought the product...

Regards
Svaneborg