[A-200/A-210] Firmware 02-04-110519-21-POP-411 (02-04-101104-21-POP-411) (27.05.2011)

[sorenba]

So, do you think bluray menus are here to stay or did this happen by mistake?

[rsegev1]

Great!
Keep send us bug fixes and new features.

I hope soon there will be multiple users profiles mainly to get better parental control.

[wbree]

Thanks you for the new firmware.
Everything works OK.
The only thing is that my device is much slower now than before. For example starting a movie takes several seconds (waiting symbol circle) before it begins. That's new for me.
A reset didn't change anything.

Any suggestions?

Wilco

[werner]

Power Cycle all your Network equipment (Computer, NAS, Switch, Router,......), change networksetting from Auto to 10/100 try again if it then works change again back to Auto and see if it still works.

Regards,
Werner

(05-27-2011 05:27 PM)wbree Wrote:  Thanks you for the new firmware.
Everything works OK.
The only thing is that my device is much slower now than before. For example starting a movie takes several seconds (waiting symbol circle) before it begins. That's new for me.
A reset didn't change anything.

Any suggestions?

Wilco

[franky8138]

Thanks

[philnort]

(05-27-2011 02:44 PM)werner Wrote:  ah one request by our engineers maybe one with a scaler can check out this thing

- Added Auto YCbCr colorspace.

we have no scaler so it is very hard for us to check.
Please let us know if it is switching correct to BT.601 or BT.709

Regards,
Werner

The BT-709 colorspace is definitely working on my BDs. (I'm using a Denon 602ci AV processor/scaler). Fuller richer color palette! Thank you.....

[werner]

can you test the Automode and start maybe a dvd or avi file with SD Resolution, are you able to verify that it then use BT.601?

(05-27-2011 06:26 PM)philnort Wrote:  

(05-27-2011 02:44 PM)werner Wrote:  ah one request by our engineers maybe one with a scaler can check out this thing

- Added Auto YCbCr colorspace.

we have no scaler so it is very hard for us to check.
Please let us know if it is switching correct to BT.601 or BT.709

Regards,
Werner

The BT-709 colorspace is definitely working on my BDs. (I'm using a Denon 602ci AV processor/scaler). Fuller richer color palette! Thank you.....

[Flash3d]

(05-27-2011 06:34 PM)werner Wrote:  can you test the Automode and start maybe a dvd or avi file with SD Resolution, are you able to verify that it then use BT.601?

(05-27-2011 06:26 PM)philnort Wrote:  

(05-27-2011 02:44 PM)werner Wrote:  ah one request by our engineers maybe one with a scaler can check out this thing

- Added Auto YCbCr colorspace.

we have no scaler so it is very hard for us to check.
Please let us know if it is switching correct to BT.601 or BT.709

Regards,
Werner

The BT-709 colorspace is definitely working on my BDs. (I'm using a Denon 602ci AV processor/scaler). Fuller richer color palette! Thank you.....

If i mainly play HD material, BT.709 would be the choice? (or just auto if it works? )

[werner]

Auto will follow the resolution of your source, so if a Video has 1280x**** then it should switch to BT.709, if the Resolution is lower then 1280x**** then it will output BT.601, but for us without a scaler which shows somewhere which mode it uses, it is very hard to verify the AUTO setting , the manual setting works for sure, but we would like to have a "yes it is switching correct" from someone who can verify it hehe.

(05-27-2011 06:46 PM)Flash3d Wrote:  If i mainly play HD material, BT.709 would be the choice? (or just auto if it works? )

[philnort]

(05-27-2011 06:46 PM)Flash3d Wrote:  

(05-27-2011 06:34 PM)werner Wrote:  can you test the Automode and start maybe a dvd or avi file with SD Resolution, are you able to verify that it then use BT.601?

(05-27-2011 06:26 PM)philnort Wrote:  

(05-27-2011 02:44 PM)werner Wrote:  ah one request by our engineers maybe one with a scaler can check out this thing

- Added Auto YCbCr colorspace.

we have no scaler so it is very hard for us to check.
Please let us know if it is switching correct to BT.601 or BT.709

Regards,
Werner

The BT-709 colorspace is definitely working on my BDs. (I'm using a Denon 602ci AV processor/scaler). Fuller richer color palette! Thank you.....

If i mainly play HD material, BT.709 would be the choice? (or just auto if it works? )

I'd already watched a couple of std. def. DVDs. They looked good/clean...I can't really (empirically) determine if it switched to BT.601...all my scaler says that it's receiving a YCbCr colorspace (I AM using the Popcorn Colorspace on "AUTO").

[Burnerbum]

(05-27-2011 02:51 PM)chris57 Wrote:  I can see quite a few angry C200 owners when the Bluray licensing issue hits the general discussions.

I haven't installed the FW yet, but if the A200 can now play BR ISO files with full menu that is great. I also have the C200 and I am not upset about this at all. The C200 came out long before the A200 and I haven't had any regrets. I still prefer the styling and flexibility of the C200. That's worth the extra price. Gonna update tonight......

[accident]

All the "Fixed ISO and BD playback fail from USB, when started through certain flash app" fixed is umc and eversion can now start a disc rip.. It doesn't add any new bluray playback features.

[andreofgyn]

I'm happy with the new YCbCr support, thanks! I tested and auto is working good so far.

Now, will Syabas fix the 3D GUI and subtitles displayed only on one side of the movie or there is no hope?

[Faceman]

I was hoping for a *fixed* zoom ratio - ie I set my Zoom to 95% - which is what my TV needs - and this becomes the default until I change it again.

it is slightly annoying having to reset it every I play a new file.

Thanks for all the other fixes and features though.

[accident]

Sounds like you need to get on the phone with your tv maker to find out how to get it out of overscan or resize it on the tv side.