[CSI] Community Software Installer 2.6.1 (OLD THREAD)

[Ger Teunis]

Nope. please disable any firewalls or proxy servers and try again.
Perhaps a firewall is blocking access or the proxy settings are incorrect (option: do not use for local addresses should be used).

[muratcam11]

(07-20-2009 01:18 PM)muratcam11 Wrote:  yeah yeah the ftp client is running and also hdd contains the files that you mentioned. But i still cannot access via ftp can csi send the files via smb?

With a 3rd party app i managed to access to my nmt but still can install any app???

[bobylapointe]

(07-20-2009 01:29 PM)Ger Teunis Wrote:  Nope. please disable any firewalls or proxy servers and try again.
Perhaps a firewall is blocking access or the proxy settings are incorrect (option: do not use for local addresses should be used).

noway
any firewall
and i can't have access to http://www.nmtinstaller.com
i don't understand

[Ger Teunis]

(07-20-2009 03:44 PM)bobylapointe Wrote:  noway
any firewall
and i can't have access to http://www.nmtinstaller.com
i don't understand

You're on 'Free' provider right? Please read up a few posts. Free blocks a range of computers. One of these computers is the server of nmtinstaller.com. They refuse to unblock or even to give any support, not important enough.
Please contact your provider, hope they'll listen if more people are complaining.

[muratcam11]

I just tried to install another program (torrentwatch)and unbelievably its installed. then i tried to install transmission again but no luck. It gives the same error. I think we are sure that isn't a firewall or proxy problem.

[muratcam11]

I solved the problem with simply erasing init file and replacing the new one.

[Ger Teunis]

(07-20-2009 07:16 PM)muratcam11 Wrote:  I solved the problem with simply erasing init file and replacing the new one.

Nice find, now when you tell the solution it sounds logical to me.
The AppInit file got corrupted, I'll implement a better update routine in the next version. Great to hear it is up and running again for you.

[toto1er_]

Ger,
a quick question about the "Free" issue, just wondering, are the screenshots hosted on a different server than nmtinstaller.com ? Cause if CSI still does not work the usual way for the "Free" users, the screenshots are displayed though ... and as i can see through my network mon, screenshots are downloaded from somewhere

[lordy]

Hi, Most of the screenshots are on various servers.
You can see the urls here

[Ger Teunis]

Some good news (hopefully) for the Free users.
My hosting provider is moving the site and repository to a new and more powerful server, hoping to a server which is not blocked by "Free".

We'll see.

[toto1er_]

(07-21-2009 06:19 AM)Ger Teunis Wrote:  Some good news (hopefully) for the Free users.
My hosting provider is moving the site and repository to a new and more powerful server, hoping to a server which is not blocked by "Free".

We'll see.

Sounds good !
It will be the easier solution for us, i received another mail from Free asking me to clear my cache ...

[Ger Teunis]

(07-21-2009 09:18 AM)toto1er_ Wrote:  Sounds good !
It will be the easier solution for us, i received another mail from Free asking me to clear my cache ...

Could you try the following in a command (cmd / dos) window?
(administrator mode on vista).

ipconfig /flushdns

[Ger Teunis]

Server has been migrated to the new, much faster server.
It may take a while for the DNS records to get updated for anyone.
The whole process will take 2 to 4 hours, no changes needed on your side.

Hopefully the 'Free' internet provider users are able to use CSI again.

[toto1er_]

(07-21-2009 02:58 PM)Ger Teunis Wrote:  Hopefully the 'Free' internet provider users are able to use CSI again.

K, i'll give it a try this eve. Thx !

[toto1er_]

(07-21-2009 03:42 PM)toto1er_ Wrote:  K, i'll give it a try this eve. Thx !

IT WORKS !!!! The "Free" issue is finally done, thanks Ger once again !!!