Twitter
Facebook
NMT Wiki
Search
Member List
HelpFirmware: 
A-400 [13 May 2013] | C-300 [30 Nov. 2012] | A-300 [30 Nov. 2012] | C-200 [21 Jan. 2013] | A-200/A-210 [10 Aug. 2012]
Networked Media Tank
/
Archive
/
Archive (Read Only)
/
Archive Popcornhour NMT Mediaplayers A-100 
/
Remote Control; Solved!
/
Remote Control; Solved!
User(s) browsing this thread: 1 Guest(s)
 Remote Control; Solved!
|
|
02-11-2008, 10:51 PM
 Post: #1 |
|||
|
|||
|
Remote Control; Solved!
The remote control does only work when I point it exactly on the a-100. Does anyone know where the IR receiver is placed and if there is something which I can do to improve this?
Does anyone uses a Kameleon AFO? I cannot learn the keys from the original remote control. Does anyone know which type of device I've to use on the AFO? Thanks. Ooris |
|||
|
|
02-12-2008, 12:27 AM
Post: #2 |
|||
|
|||
Re: Remote Control
ooris Wrote:The remote control does only work when I point it exactly on the a-100. Does anyone know where the IR receiver is placed and if there is something which I can do to improve this? You removed the protective film over the face plate of the PCH?? Regards, paulW |
|||
|
|
|
02-12-2008, 08:22 AM
Post: #3 |
|||
|
|||
Re: Remote Control
paulw2 Wrote:You removed the protective film over the face plate of the PCH?? Yep |
|||
|
|
|
02-12-2008, 08:47 AM
Post: #4 |
|||
|
|||
|
Make sure that the IR receiver is flush to the front panel and square on to the panel.
A400: SSD+SD Card(Apps), HDMI A300: USB(Apps), HDMI C200: USB(Apps), BD SH-B083L(SB01), HDMI CAT6 Wired Network: TV TX-P42G20, HP ProCurve 1400-8G, Netgear GS-608/605, Synology CS407 |
|||
|
|
|
02-12-2008, 08:50 AM
Post: #5 |
|||
|
|||
chris57 Wrote:Make sure that the IR receiver is flush to the front panel and square on to the panel. You mean I've to open It and move the receiver to the right place? Is it that flexible? |
|||
|
|
|
02-12-2008, 09:28 AM
Post: #6 |
|||
|
|||
|
the key word is flush..
the reciever needs to align totally flush with the faceplate.. for 100% signal recieving strength Join our facebook page today! http://www.facebook.com/networkedmediajukebox |
|||
|
|
|
02-12-2008, 09:50 AM
Post: #7 |
|||
|
|||
alex.brokenarrow Wrote:the key word is flush.. I opened the box en pushed the receiver in front of the faceplate as good and straight as possible. It is receiving a bit better now, but still not good. Can I replace the receiver by a better one? I once obtained a LIRC receiver for my PC's serial port. That one has a TSOP1737 on it. It receives everything, even when I point at the ceiling... |
|||
|
|
|
02-12-2008, 09:57 AM
Post: #8 |
|||
|
|||
|
you can try and let us know..
 anyway, it is a known "problem" that the remote will only work if you point directly at it... so i am getting used to pointing the remote to a-100 rather than my TV... cheers Join our facebook page today! http://www.facebook.com/networkedmediajukebox |
|||
|
|
|
02-12-2008, 08:10 PM
Post: #9 |
|||
|
|||
alex.brokenarrow Wrote:you can try and let us know.. The solution is much easier! I've tried to use the remote without the face plate. It worked perfect! (yes, also via the ceiling). So I removed (scratched) the paint from the plate in front of the IR receiver and put it back. The remote is working perfect now (no more aiming and pressing twice) The AFO is also working. Through the Helpdesk I've received the codes, they are already known there (mine is Kameleon URC8308). The AFO even works better (via the back wall :wink: ). |
|||
|
|
|||
![[+]](images/collapse_collapsed.gif)
1 user says Thank You to ooris for this post |
|
02-13-2008, 10:47 AM
Post: #10 |
|||
|
|||
Kamaleon URC8305
ooris Wrote:Hi,alex.brokenarrow Wrote:you can try and let us know.. I have Kamaleon URC8305 that is similar to URC8308 (only 5 devices control), can you tell me the codes for PCH that you are using? Thanks in advance. |
|||
|
|
|
02-13-2008, 11:00 AM
Post: #11 |
|||
|
|||
Re: Kamaleon URC8305
carper Wrote:Hi, Its code 2260, but its not in the AFO by default. You have to upload the code. You have to call the helpdesk for it, or I can mail you if you PM me. (My soundfile does also include other codes, but that doesn't matter. If you had uploaded custom codes already to your AFO they will be overwritten. In that case you have to call the helpdesk for a soundfile with all your codes.) |
|||
|
|
|
02-13-2008, 11:55 AM
Post: #12 |
|||
|
|||
Re: Kamaleon URC8305
carper Wrote:I have Kamaleon URC8305 that is similar to URC8308 (only 5 devices control), can you tell me the codes for PCH that you are using? If you have a JP1 interface, i can send you the file. |
|||
|
|
|
04-08-2008, 10:13 AM
Post: #13 |
|||
|
|||
|
Hi,
I have the 1st version of the remote, the 8060. for the code 2260, do you know which type of device and the brand name I must choose on http://www.ezremote.com website to make my wav ? thanks in advance, CaiRve Sony 40W4000@2.5m,Harmony One PCH-A100 with 40gb/Last firmware/Power DVD Skin+BR Player Panasonic+Sat by OrangeSAT - Connected to Sony DAV-S550 by optical switch Gigabyte LAN with Athlon X2-4200 s939/4Gb under Seven Pro 64Bits with 4*1To+2*1.5To+500Go+ 1+2*320Go(raid1) HDs Nintendo Wii |
|||
|
|
|
04-08-2008, 11:04 AM
Post: #14 |
|||
|
|||
|
May be of help to some. I use an MX-500 universal learning remote from Universal Remote (http://www.universalremote.com/product_d...?model=55)
These remotes have VERY strong IR output signal and basically flood the room with IR. I have no trouble aiming the remote casually at my entertainment center and it works reliably. Cheers. -- Denon 3808CI PCH A100 Roku M1001 Samsung PN50B400 |
|||
|
|
|
04-08-2008, 12:46 PM
Post: #15 |
|||
|
|||
Re: Kamaleon URC8305
bruceas Wrote:carper Wrote:I have Kamaleon URC8305 that is similar to URC8308 (only 5 devices control), can you tell me the codes for PCH that you are using? I would like the JP1 file if anyone had it also. Thanks, |
|||
|
|
|
« Next Oldest | Next Newest »
|