Threaded Mode | Linear Mode

R1CH · 09-19-2009, 08:05 PM

I have a few issues with my C200.
I can't connect to it via ftp, but can connect to it via samba.
I can connect to the myiHome server on the c200, from a pc, but it is unusably slow, as in I click a link and it takes maybe 3 mins for the page to come up and after clicking through a few links it seems to give up, uPNP server doesnt seem to work either as my showcenter cannot see the c200.
The other issue I have is after I have playing a video for say an hour the remote becomes unresponsive and then the LCD display freezes, but the video keeps playing. If I press pause and nothing happens, about 10-20mins later the video will pause and the c200 becomes responsive again.

Are my probs all likely to be because of the beta firmware, or should I be thinking about returning my c200 for repair.

Thanks
Rich Smile

oddball · 09-19-2009, 08:11 PM

Beta problems, just stick around and wait for the new Firmware Smile

**dc11ab** · 09-19-2009, 08:24 PM

(09-19-2009 08:05 PM)R1CH Wrote: (...)

I can't connect to it via ftp, but can connect to it via samba.

Can you describe the error in more detail?
(Time out? Wrong user/password? etc.)

R1CH · 09-19-2009, 09:29 PM

I just get a failed to connect message in firefox, when I try to ftp. If I try to use CSI I get a cannot connect to NMT FTP server.

Cheers
Rich

oddball · (This post was last modified: 09-19-2009 10:36 PM by oddball.)

Have you started the Ftp-Server in the apps setting in the

setup menu, upnp etc... ?

R1CH · 09-19-2009, 10:57 PM

yep the services are running

kenney · 09-19-2009, 11:19 PM

I am unable to connect to it as well. I log on with ftpuser and I tried 1234, then changed the password to see if that would make a difference, with no luck. ftp server is running.

this is what I see.

new-host-3:~ kenney$ ftp 192.168.1.14
Connected to 192.168.1.14.
220---------- Welcome to Pure-FTPd ----------
220-You are user number 1 of 3 allowed.
220-Local time is now 22:16. Server port: 21.
220 You will be disconnected after 1440 minutes of inactivity.
Name (192.168.1.14:kenney): ftpuser
331 User ftpuser OK. Password required
Password:
530 Login authentication failed
ftp: Login failed
ftp>

oddball · 09-19-2009, 11:21 PM

Okey, do you use this format in the adress field in FireFox:

ftp://nmt:1234@your.ip.adr.ess:21

kenney · 09-19-2009, 11:25 PM

Oddball, thanks for that line. I had'nt tried using the nmt username (the instructions said ftpuser only), it allowed me to log on quickly.

new-host-3:~ kenney$ ftp 192.168.1.14
Connected to 192.168.1.14.
220---------- Welcome to Pure-FTPd ----------
220-You are user number 1 of 3 allowed.
220-Local time is now 22:23. Server port: 21.
220 You will be disconnected after 1440 minutes of inactivity.
Name (192.168.1.14:kenney): nmt
331 User nmt OK. Password required
Password:
230-This server supports FXP transfers
230 OK. Current directory is /
Remote system type is UNIX.
Using binary mode to transfer files.

oddball · 09-19-2009, 11:31 PM

I'm glad you get it to work Big Grin

R1CH · 09-19-2009, 11:52 PM

Right, after a bit of fiddling I think I have found the problem, I stopped all the services, rebooted and restarted ftp, myiHome and UPnP. I then managed to connect through firefox and CSI, I then tried opening myiHome through firefox which did not get anywhere, but at this point FTP stopped working again, so seems to be a problem with the myiHome server.

fallen888 · (This post was last modified: 09-23-2009 04:14 AM by fallen888.)

(09-19-2009 11:52 PM)R1CH Wrote: Right, after a bit of fiddling I think I have found the problem, I stopped all the services, rebooted and restarted ftp, myiHome and UPnP. I then managed to connect through firefox and CSI, I then tried opening myiHome through firefox which did not get anywhere, but at this point FTP stopped working again, so seems to be a problem with the myiHome server.

Thanks, R1CH.. I had the same issue and finally was able to FTP in using 'nmt' as username, but only after stopping the myiHome server and rebooting. Weird... why in the hell does all the documentation say the username is 'ftpuser' when it's not? Huh

EDIT: Of course now I can't access via http://mypch:8088 now. Seems like it's either one or the other.. but we can't have both.. errr.

**dc11ab** · 09-23-2009, 07:25 AM

(09-23-2009 04:07 AM)fallen888 Wrote: Weird... why in the hell does all the documentation say the username is 'ftpuser' when it's not?

The A3 sheet that followed in my C-200 box said user: nmt

Are you referring to the wiki, or some other documentation?

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Blu-Ray ISO loading issues across multiple ISO	needlesbox	2	2,050	11-15-2010 10:50 PM Last Post: needlesbox
	Playback Speed Adjustment	jsuares	3	2,004	11-14-2010 08:23 AM Last Post: accident
	A200 BD Playback Directors Cut Only	HeadHodge	3	1,095	11-10-2010 04:57 PM Last Post: HeadHodge
	bd disc playback	spl147	0	709	11-08-2010 05:30 PM Last Post: spl147
	[Feature Request] Map UP/DOWN buttons to 5 seconds fw-rw during playback	thunder_crash	3	1,509	11-08-2010 02:07 PM Last Post: jpsdr
	Incorrect framerate info for video playback	marbi	4	1,434	11-08-2010 08:49 AM Last Post: halfelite
	MKV VC1 playback stutters - ANY SOLUTION ???	anemos	4	1,613	11-08-2010 02:50 AM Last Post: halfelite
	[C/A200 FEATURE REQ] Cursor Playback Control + Same Control in Applications	jopereira	1	1,175	11-04-2010 09:23 PM Last Post: tinnef
	A-200 issues	mobor	6	1,953	11-01-2010 10:43 AM Last Post: mobor
	A-200 issues	spacenoxx	1	963	10-24-2010 01:59 AM Last Post: chris57