Firmware: A-410 [01 Apr. 2014] | A-400 [12 Mar. 2014] | C-300 [13 Feb. 2014] | A-300 [24 Feb. 2014] | C-200 [11 July 2013] | A-200/A-210 [11 July 2013] | Popbox V8 [3 Dec 2013]

Just got your NMT | WIKI has the answers | Search the forum | Forum Rules/Policy | Firmware & Official NMT News | Popcornhour manuals



User(s) browsing this thread: 1 Guest(s)
Thread Closed 
[200] [CSI] Community Software Installer 2.7.2 ** UPDATED DEC 28th 2011 **
09-08-2009, 09:26 PM
Post: #16
RE: [CSI] Community Software Installer for C200
Have you tried all the "availibel" firmwares ?
Find all posts by this user
09-08-2009, 09:30 PM
Post: #17
RE: [CSI] Community Software Installer for C200
I didn't try them all. Perhaps it might be a good idea that somebody collected all old and newer firmwares and nmt apps.
Especially the old and beta ones, those are interesting because they might have missing protections and so.
Not saying they have, but you'll never know when a bug may come in handy Smile

Easy way of installing software on your NMT using just your mouse: NMT Community Software Installer
Visit this user's website Find all posts by this user
09-08-2009, 10:19 PM
Post: #18
RE: [CSI] Community Software Installer for C200
no i can tell you that the protection was already in the first firmware Sad, also take note that going back is often not possible because on the early builds it was most of the time stepstones where you cant go back anymore, only if you wanna kill your player!!!
Find all posts by this user
09-08-2009, 10:30 PM
Post: #19
RE: [CSI] Community Software Installer for C200
(09-08-2009 06:43 PM)Ger Teunis Wrote:  Yeah, and that TNT isn't driving over the box this time.
Once I received a box which looked like they drove over it, not very careful those truck drivers.

PS: not sure at all about the delivery date yet.
Just guessing because some others seem to have received theirs on the forums or one of these days Big Grin


We must have the same delivery guy. Lol. I had one package ran over. But when I lived at my folks place. The ups driver would not even get out of his truck. He would grab the package whatever size and throw it out the door and over my parents gate. He was to lazy to walk up the stairs to the walk up gate.
Find all posts by this user
[+] 1 user says Thank You to halfelite for this post
09-08-2009, 10:31 PM
Post: #20
RE: [CSI] Community Software Installer for C200
(09-08-2009 10:30 PM)halfelite Wrote:  We must have the same delivery guy. Lol. I had one package ran over. But when I lived at my folks place. The ups driver would not even get out of his truck. He would grab the package whatever size and throw it out the door and over my parents gate. He was to lazy to walk up the stairs to the walk up gate.

LOL, you got the be kidding right?
Too funny Big Grin

Easy way of installing software on your NMT using just your mouse: NMT Community Software Installer
Visit this user's website Find all posts by this user
09-09-2009, 11:08 PM
Post: #21
RE: [CSI] Community Software Installer for C200
(09-06-2009 06:25 PM)popcornmix Wrote:  No, I think the USB drives may be different.
Using Windows / SMB it shows up as:
USB_DRIVE_C-1.BOOT

where boot is the label of the USB drive. It has same name in any of the 4 usb slots.

If I browse USB drive from C-200, it shows the drive name as //BOOT

Clicking your "Telnetd" link gives "Request cannot be processed". Changing link to:
Code:
<a href="http://localhost.drives:8883/USB_DRIVE_C-1/script.cgi">Telnetd</a>
gives "Request cannot be processed".
Code:
<a href="http://localhost.drives:8883/USB_DRIVE_C-1.BOOT/script.cgi">Telnetd</a>
says "Telnetd started on port 5151"

From PC trying:
Code:
telnet 192.168.4.12 5151
Connecting To 192.168.4.12...Could not open connection to the host, on port 5151: Connect failed

I changed reference in script.cgi to USB_DRIVE_C-1.BOOT too but still the same. Any suggestions?

Did you resolve what the C-200 local USB drives are called? I am having the same problem getting YAMJ working with local USB drives. The internal SATA 2.5" is called SATA_DISK rather than HARD_DRIVE on the A110.
Find all posts by this user
09-10-2009, 12:41 AM
Post: #22
RE: [CSI] Community Software Installer for C200
USB_DRIVE_C-1.BOOT was the correct name for my disk.
It wasn't working because telnetd had been compiled with wrong options.

You will need to change BOOT to the volume name of your drive.
Find all posts by this user
09-10-2009, 01:29 AM
Post: #23
RE: [CSI] Community Software Installer for C200
(09-10-2009 12:41 AM)popcornmix Wrote:  USB_DRIVE_C-1.BOOT was the correct name for my disk.
It wasn't working because telnetd had been compiled with wrong options.

You will need to change BOOT to the volume name of your drive.

So you got telnet working?
Find all posts by this user
09-10-2009, 01:50 AM
Post: #24
RE: [CSI] Community Software Installer for C200
No. The missing kernel support for PTY complicates that.
I got iperf running correctly.
I compiled nc (netcat) which supports remote execution allowing a "poor man's telnet", but it didn't run. I need to investigate that. It's rather painful developing without telnet. I'm clicking on cgi links from Popcorn and piping output to a file - I'm not sure if anyone has a better scheme.
Find all posts by this user
09-10-2009, 02:15 AM
Post: #25
RE: [CSI] Community Software Installer for C200
nc's execute did not work for me, I just cooked up my own shell spawn, and it works enough to use it as telnet.
Visit this user's website Find all posts by this user
09-10-2009, 03:10 AM
Post: #26
RE: [CSI] Community Software Installer for C200
(09-10-2009 02:15 AM)lundman Wrote:  nc's execute did not work for me, I just cooked up my own shell spawn, and it works enough to use it as telnet.

lundman is the man. I just got my c200 today about to take it out of the box. Hope you publish some of your findings on your wiki.
Find all posts by this user
09-10-2009, 04:16 AM
Post: #27
RE: [CSI] Community Software Installer for C200
Not sure it needs that? In terms of setup, the C200 and A100 are setup the same. Couple of mountpoint changes, some new processes. Otherwise, in Unix land, they are the same. What you already know, will still work.
Visit this user's website Find all posts by this user
09-10-2009, 04:23 AM
Post: #28
RE: [CSI] Community Software Installer for C200
(09-10-2009 04:16 AM)lundman Wrote:  Not sure it needs that? In terms of setup, the C200 and A100 are setup the same. Couple of mountpoint changes, some new processes. Otherwise, in Unix land, they are the same. What you already know, will still work.

Ok thanks. I just popped a drive in mine So first boot up is coming.
Find all posts by this user
09-10-2009, 04:55 AM
Post: #29
RE: [CSI] Community Software Installer for C200
(09-10-2009 01:50 AM)popcornmix Wrote:  No. The missing kernel support for PTY complicates that.
I got iperf running correctly.
I compiled nc (netcat) which supports remote execution allowing a "poor man's telnet", but it didn't run. I need to investigate that. It's rather painful developing without telnet. I'm clicking on cgi links from Popcorn and piping output to a file - I'm not sure if anyone has a better scheme.

That's basically what I've been doing. I guess I need lundman's shell.

Martin
Find all posts by this user
09-10-2009, 05:19 AM
Post: #30
RE: [CSI] Community Software Installer for C200
Just got my c200 today, nice box although did it need 13 screws and 2 screwdrivers to install the 2.5" drive? Smile Untill lundmans poor man shell is released, i'm using a shell script that would probably be the homeless guys shell. It just creates a cgi script of the entered command, sends it to the C200, and then executes it.

Requires a sh compatible shell(linux/macos), wget, and by default it uses lftp to connect. Can run most commands, it wont remember if you change directories or anything though. Cant wait to see lundmans more appropriate shell

Type quit or Ctrl-C to exit
Code:
#!/bin/sh

# IP of the c200
C200IP=192.168.1.200
# an ftp command to execute that will connect to c200
# and accepts commands via pipe
FTPCLIENT="lftp nmt:1234@$C200IP"


CMDFILE='c200run.cgi'
cd /tmp
while true; do
  echo -n '# '
  read CMD
  if [ x"$CMD" = x"quit" ]; then
    exit;
  fi
  if [ x"$CMD" != x"" ]; then
    cat > $CMDFILE <<EOF
#!/bin/sh
echo 'Content-Type: text/html'
echo ''
$CMD
EOF
    echo "put $CMDFILE;chmod 755 $CMDFILE" | $FTPCLIENT
    wget --header="Host: localhost.drives" -qO - http://$C200IP:8883/SATA_DISK/$CMDFILE
  fi
done

Automated TV Downloads | On-Demand Network Shares | Faster PHP (lighttpd+fastcgi+apc)
PCH-A100 | PCH-C200 | XBMC HTPC | Sharp Aquos 42D62U | Logitech Z-5500
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  [100/200/300/400] Music Player Daemon (MPD) - v0.18.5 - Updated on 10th Dec 2013 - CSI vaidyasr 560 226,345 Today 11:19 AM
Last Post: aresso87
  [400] oPKG v0.2.0 - Updated on 30th Jan 2014 - CSI vaidyasr 236 31,733 04-09-2014 09:02 PM
Last Post: Adelscott
  [200/300] oPKG v0.2.0 - Updated on 30th Jan 2014 - CSI vaidyasr 505 237,529 04-03-2014 12:34 AM
Last Post: vaidyasr
  [100/200/300/400] Community Software Installer 2.7.4.0 ** UPDATED MAR 18th 2013** jhmiller 506 122,448 03-28-2014 11:40 PM
Last Post: Bogey
  [100/200/300/400] aMule v2.3.1 - Updated 7th Oct 2010 - CSI vaidyasr 149 53,944 02-14-2014 06:11 AM
Last Post: drh104
Star [100/200/300/400] Download Manager v3.2 Released - Updated 10th Apr 2009 - CSI vaidyasr 1,701 706,483 01-19-2014 06:47 PM
Last Post: calbo
  [200/300/400] MKVTools v1.1.1 - Updated 27th Feb 2010 - CSI vaidyasr 46 19,054 01-04-2014 06:27 PM
Last Post: pencitku
  [400] Question is there a Software distribution app Exter 0 357 11-24-2013 02:11 PM
Last Post: Exter
  [100/200/300/400] Busybox v1.22.1 - Updated on 31st Jan 2014 - CSI vaidyasr 0 779 11-23-2013 07:05 AM
Last Post: vaidyasr
Question [200] Any hints how to package software for C.S.I/opkg? marmotamarmota 5 1,745 07-17-2013 07:24 PM
Last Post: PedroDelCargo

Forum Jump: