[A110] Firmware 01-17-100516-15-POP-403-000 (00-17-091216-15-POP-403 Apps)

[tbanting]

HAs anyne had any problems with the 02-04-101104-21-POP-408-000 firmware?

I'm in a situation now where I cannot gain access to anything on the right hand side of any menus.

I used to use the directional button on the remote to flip to the right hand side- now I cannot.

I changed the batteries in the remote and I also checked the directional pad was ok by going into the apps menu and pressing right.

Any ideas?

[defected07]

(11-23-2010 02:48 PM)reutel Wrote:  When will this be fixed???

Had this problem. Had to remove the header compression from the MKV itself. A program for Mac (MKVtools) has this--so it removes the compression and remuxes. Should only take about 5 minutes or so.

[zombiehunter]

you have locked the setup menu

go to the setup menu press setup button then play

(12-05-2010 09:29 PM)tbanting Wrote:  HAs anyne had any problems with the 02-04-101104-21-POP-408-000 firmware?

I'm in a situation now where I cannot gain access to anything on the right hand side of any menus.

I used to use the directional button on the remote to flip to the right hand side- now I cannot.

I changed the batteries in the remote and I also checked the directional pad was ok by going into the apps menu and pressing right.

Any ideas?

[ProfHiggins]

Hi, I am deeply disturbed by the fact that my PopCorn Hour A110 stopped functioning (No connection to the Wi-Fi network) after having updated the firmware on the 23 of september this year. I bought the device in aug. 2009 and it has worked until this update. The update went OK and the message was that the update was successful! I have remade the update with a USB-memory, same result. I know after one year of use reasonably well how to work with it, the link quality (new option!) is around 60 - 80/100. Hope someone could give me a hint?

[LouisCypher]

(12-17-2010 12:31 AM)ProfHiggins Wrote:  Hi, I am deeply disturbed by the fact that my PopCorn Hour A110 stopped functioning (No connection to the Wi-Fi network) after having updated the firmware on the 23 of september this year. I bought the device in aug. 2009 and it has worked until this update. The update went OK and the message was that the update was successful! I have remade the update with a USB-memory, same result. I know after one year of use reasonably well how to work with it, the link quality (new option!) is around 60 - 80/100. Hope someone could give me a hint?

I have same problem - did update and my wireless dongle is now usless. Tryed rolling back firmware still dead. Posted on forum for help & got no help.

I hope a fix comes soon as I will be dumping my Popcorn and certainly wouldnt recommend this media player to anyone else.

[Fvrank]

(08-22-2010 08:31 AM)awdkoers Wrote:  @Ferderkin: Pity that there is no solution in this firmware. There are a lot of people who can't update because of this. The problem is that there is not enough drivespace on the first partition of your Harddisk.

The solution has been posted before:
- install telnet on your popcorn (through CSI or use lundman usb telnet)
- use putty to telnet to your popcorn
- type cd /mnt/syb8634/server and press enter
- type rm mscanner.db and press enter

Now that mscanner.db is removed there is enough drivespace on the first Harddisk partition.
Do the firmware / apps update immediately, because the mscanner.db is automatically recreated and consuming drivespace.

Hope this works for you.


I spend 2 nights finding this solution. It works!!!! Thanks. In all other Posts it is not clear this is the solution for not being able to update nmt apps after updating the firmware version, getting the message not find USB stick.

Realy i tried:
Renaming indexfile
Formatting my USB 6 times
Removing scandisk partition
Tried other USB stick
Removing all Apps
Using Front USB Port and back Side
Upgrading 1 version at à time

All failed and mentioned as a solution to the usb problem. So i agree with some it's hard to finder the correct solution. This works for me!!


Thanks