[C-200] Firmware 02-03-100821-21-POP-408 (02-03-100427-21-POP-408 Apps) (26.08.2010)

[Dave_D]

(08-27-2010 01:39 PM)aaronwt Wrote:  I do see I can finally run my C200 in auto mode one of my Dlink gigabit switches. Previously I bought a 10/100 switch(My other 12+ switches are all gigabit) just so I could run the C200 without issues. It used to hang when booting if connected to the gigabit switches I use. But now it boots up fine on my gigabit switches and even when set in auto mode giving it a gigabit link with the switch.

If you are satisfied that your switch is compatible for "auto" setting, maybe you could help the community by adding your switch to the compatibility list on the wiki.

Make sure you include the firmware version as well.

Thanks.

[VelvetPaw]

Ok, I just tested a couple settings with my component cable:
* 1080p/24: my projector interprets this signal as 480i/60
* 1080p/50: same as with HDMI, picture, if it's visible, wiggles a little (explains sync issues)
* 1080p/60: works
* 1080i and lower: works

Gonna try my super short HDMI cable now...

[nicob]

(08-27-2010 01:50 PM)VelvetPaw Wrote:  Ok, I just tested a couple settings with my component cable:
* 1080p/24: my projector interprets this signal as 480i/60
* 1080p/50: same as with HDMI, picture, if it's visible, wiggles a little (explains sync issues)
* 1080p/60: works
* 1080i and lower: works

Gonna try my super short HDMI cable now...

Not sure this is a supported thing, 1080p over component: http://www.hdtvinfo.eu/news/hdtv-article...e-cea.html
I thought that the maximum was 1080i

[Mariandvd]

What program shoud we use to remux a bluray iso or a bluray folder to work with this new firmware, on the last firmware i was having problems with remux-in bluray, video played fine, but there was no sound at wall. I want a remux program to remux subtitles like it is in the bluray iso, not to change subtitle size or subtitle font.

[Dave_D]

MakeMkv is the basis for the developers. It can convert a BD to MKV including HD Audio tracks, PGS Subtitles & Chapter List.

[fletcho]

have watched several avi files after firmware update. The avi does not resume from where it was stopped. Previous firmware was ok resume worked.
but good news is all my DB movies work now.
Still no sign of discrete power ir codes?
anyway still a nice release..

[VelvetPaw]

And now, that I tested the setup with the only HDMI cable I have: the one that came with the PCH, I can rule out my stuff, cables etc...:
* 1080p/24: works
* 1080p/50/60: "no signal" on my projector...

[arthur156]

Did update with the USB-stick....did go well.
Update NMT programs did not start automaticly (according to README.txt), but had to do it manually.

//Web Services //Apps:
Youtube: Only analog sound from receiver, no SPDIF, HDMI sound is coming through to the TV.
Potobucket : endless waiting, but will not start.

Rest...still playing with it and looks ok sofar.

[Martien]

(08-27-2010 01:24 PM)VelvetPaw Wrote:  It works flawlessly in any other mode (1080i 50/60 Hz and 1080p/24 for example..)

If you use it in 720p, 1080i, 1080p24 the pixelclock is about half than with 1080p50!
You can look at it also in a different way. If you play 24p only half of the amount of picures are squeezed through the cable.

[partyfart]

Great update, no issues so far. Really worth the looooooooooong wait
Curious when the small bugfixes (rc5) will be out, like Werners said.

[VelvetPaw]

(08-27-2010 02:08 PM)Martien Wrote:  If you use it in 720p, 1080i, 1080p24 the pixelclock is about half than with 1080p50!
You can look at it also in a different way. If you play 24p only half of the amount of picures are squeezed through the cable.

Yeah, but just saying, that it can't be my HDMI cable... even if it's 50 ft long..

[aaronwt]

(08-27-2010 02:06 PM)arthur156 Wrote:  Did update with the USB-stick....did go well.
Update NMT programs did not start automaticly (according to README.txt), but had to do it manually.

.
.........

The same thing happened here. I had to manually start the install for them.

[Dave_D]

We got a reply from Syabas regarding those experiencing Err029 during firmware upgrade process;

Quote:ERR029: unable to unmount /opt/syb

They can retry the update after reboot their player.

Please be guided accordingly.

[Bjur]

Before i update my 2 popcorn. What is the correct process to do to prepare before updating to newest fw to avoid the error message? I also have csi installed.

[Dave_D]

(08-27-2010 02:33 PM)Bjur Wrote:  Before i update my 2 popcorn. What is the correct process to do to prepare before updating to newest fw to avoid the error message? I also have csi installed.

Turn off all CSI Apps
Turn off all NMT Apps
Reboot
run update (USB or Online)
Reboot
run NMT Setup Wizard
Reboot
Turn on all NMT Apps you use
Turn on/re-install CSI Apps if need be.
Go to Setup > Maintenance.. Press File Mode button on remote and select Clear Cache.

One more reboot and enjoy.