Lost Multi-Network Mount after Firmware Update

[NoobUser123]

So I had the following in my start_app.sh file to enable the mutliple mounting of network drives. Everything worked fine until I updated to the latest firmware.

The mounting now no longer takes place.

Any ideas if how to enable mounting of multiple network drives again with the new firmware??

/bin/mount -t nfs 192.168.5.40:/volume2/Volume_2 "/opt/sybhttpd/localhost.drives/SATA_DISK/Volume_2" -o soft,intr,rsize=16384,wsize=16384,tcp
/bin/mount -t nfs 192.168.5.40:/volume1/Volume_1/Movies "/opt/sybhttpd/localhost.drives/SATA_DISK/Volume_1" -o soft,intr,rsize=16384,wsize=16384,tcp
/bin/mount -t nfs 192.168.5.40:/volumeUSB2/usbshare "/opt/sybhttpd/localhost.drives/SATA_DISK/USB_2" -o soft,intr,rsize=16384,wsize=16384,tcp
/bin/mount -t nfs 192.168.5.40:/volumeUSB1/usbshare "/opt/sybhttpd/localhost.drives/SATA_DISK/USB_1" -o soft,intr,rsize=16384,wsize=16384,tcp

[garp99]

After any firmware update, you *must* re-run CSI app and install Lundman's shell,
which triggers the changes needed to the ftp server, and calls start_app.sh

[NoobUser123]

thank you!