[7. June 2013] Youporn available now | [19. April 2013] A-400 Advanced Network Setup | [11 Jan. 2013] Customize your A-400 Home Screen

Firmware: A-400 [13 May 2013] | C-300 [30 Nov. 2012] | A-300 [30 Nov. 2012] | C-200 RC1 [13 June 2013] | A-200/A-210 RC1 [13 June 2013]

Just got your NMT | WIKI has the answers | Search the forum | Forum Rules/Policy | Firmware & Official NMT News | Popcornhour manuals



User(s) browsing this thread: 1 Guest(s)
Thread Closed 
No audio with PCH C-200
09-13-2010, 05:15 PM
Post: #1
No audio with PCH C-200
Just replaced my xtreamer which was connected to Denon AVR-970 by PCH C-200. Xtreamer has worked fine so far, but with C-200, I sometimes get no audio (it lasts about 30 seonds - 3 minutes) while playing movies. There is no stuttering at that time, just no sound. Changed sereral HDMI cables with different HDMI ports IN on Denon AVR, but no help at all.
C-200 actually works fine with my Onkyo receiver at another room playing the same movies.

Any help would be appreciated.
Find all posts by this user
09-13-2010, 06:57 PM
Post: #2
RE: No audio with PCH C-200
Are you using the latest firmware on the C200?

Also I tried to google your receiver but can't find the product model (AVR-970)

A200 connected to 32" Samsung UA32C5000
C200 connected to Denon 1610 AVR and 42" LG 42LH50YR
Encore ENHGS-500 5 port Gigabit switch.
Find all posts by this user
09-13-2010, 07:04 PM
Post: #3
RE: No audio with PCH C-200
a 970 doesnt exist.

I am going to assume it's a 790:

http://www.usa.denon.com/ProductDetails/4891.asp

C-200 || YAMJ || AEON || Lowlist 75%
Acer Aspire EasyStore WHS [(1) 1TB WD Green(sys), (2) 1.5TB Samsung Spinpoint(data), (1) 2TB WD Green (data)]
Vivitek H1080FD || 110" DIY BOC screen || Onkyo HT-S6100 || Logitech Harmony 1100 || (2) Netgear GS-605
Find all posts by this user
09-13-2010, 07:18 PM
Post: #4
RE: No audio with PCH C-200
Sorry, it's 790. And yes, latest firmware, Aug 2010.
Find all posts by this user
09-13-2010, 07:29 PM
Post: #5
RE: No audio with PCH C-200
Things you can try;

- Disabling HDMI Control on the Denon 790.

It's under Manual Setup (Menu on remote) > HDMI Control

If that works, I'll give you your options.

A200 connected to 32" Samsung UA32C5000
C200 connected to Denon 1610 AVR and 42" LG 42LH50YR
Encore ENHGS-500 5 port Gigabit switch.
Find all posts by this user
09-15-2010, 03:26 AM
Post: #6
RE: No audio with PCH C-200
Thanks Dave, I'll check it.
Find all posts by this user
09-16-2010, 11:39 PM
Post: #7
RE: No audio with PCH C-200
Dave,
From Manual Setup
4-2. HDMI Setup
I set HDMI Control : OFF

Still get the same problem. So, how?
Thanks.
Find all posts by this user
09-17-2010, 04:26 AM
Post: #8
RE: No audio with PCH C-200
Ok.

You're best bet to isolating your issue to is to downgrade to the May 7 firmware.

http://www.popcornhour.com/download/C200...-C200.html

It uses a different set of HDMI drivers

A200 connected to 32" Samsung UA32C5000
C200 connected to Denon 1610 AVR and 42" LG 42LH50YR
Encore ENHGS-500 5 port Gigabit switch.
Find all posts by this user
09-17-2010, 05:22 AM
Post: #9
RE: No audio with PCH C-200
did you also check is there is new Firmware for that Denon AVR-970?


PCH-A100/A210/C200/A400 500GB EXT3 HDD<-->HDMIv1.3<-->Onkyo TX-NR1010<-->HDMIv1.3<-->Panasonic TX-P46S10
13 NTFS USB drives on 3 hubs attached to the A300, 3 Seagate blackarmour NAS 3TB, 2 Seagate Central 4TB


The inability to setup and configure the NMT should not be disguised as a defect of the box
Find all posts by this user
09-17-2010, 08:48 PM
Post: #10
RE: No audio with PCH C-200
(09-17-2010 05:22 AM)Willem53 Wrote:  did you also check is there is new Firmware for that Denon AVR-970?
How to check Denon firmware, please?
I did check Denon USA, but didn't see my model there. Thanks.
http://www.usa.denon.com/ProductUpdatesUpgrades.asp
Find all posts by this user
09-18-2010, 05:43 AM
Post: #11
RE: No audio with PCH C-200
Call their customer support line...

I did see that the Denon HDMI repeater does not handle 1080p 50fps.... http://www.usa.denon.com/AVR_3_Digit_HDM..._v0528.pdf
so it boils down to HDMI sync being lost due to
1. cable issue
2. Denon HDMI repeater fault
3. HDMI sync failure between Denon and Display
4. display HDMI response


PCH-A100/A210/C200/A400 500GB EXT3 HDD<-->HDMIv1.3<-->Onkyo TX-NR1010<-->HDMIv1.3<-->Panasonic TX-P46S10
13 NTFS USB drives on 3 hubs attached to the A300, 3 Seagate blackarmour NAS 3TB, 2 Seagate Central 4TB


The inability to setup and configure the NMT should not be disguised as a defect of the box
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Problem with WD element 3TB and PCH A200 YOANNS 3 588 06-14-2013 08:00 PM
Last Post: Valdhor
  a-200 4tb external drive yes or no? sike222 0 137 06-14-2013 05:56 PM
Last Post: sike222
  PCH c200 ftp djultimate 1 210 06-08-2013 11:22 PM
Last Post: wgstarks
Car C-200 video output issue aaron_9 0 197 05-31-2013 08:25 PM
Last Post: aaron_9
  [A200] No audio by some files pven 9 448 05-31-2013 07:17 AM
Last Post: pven
  C-200 Power Supply nuke12 87 27,559 05-20-2013 10:28 PM
Last Post: Perius
  Help needed.- C-200 has stopped reading WD15EARS. Lonz72 10 1,053 05-17-2013 12:37 AM
Last Post: Lonz72
  need support for c-200, router problems Deus 0 246 05-16-2013 10:11 PM
Last Post: Deus
  [C-200 July 2011] How to recover Firmware if something goes wrong werner 163 104,494 05-15-2013 05:55 PM
Last Post: kevf
  C-200 or C-300 Stock Heatsink Presjar 0 236 05-15-2013 01:07 PM
Last Post: Presjar

Forum Jump: