[A-200] Firmware 02-03-100918-21-POP-411 (02-03-100427-21-POP-411 Apps) (23.09.2010)

[werner]

hmm here they work

(09-23-2010 06:18 PM)Snick66 Wrote:  External .ASS - does not work.
External .SSA - get out for screen limits.

[elfeneco]

(09-23-2010 06:13 PM)Dave_D Wrote:  You can try going into Setup > Maintenance... press the FILE MODE button and select Clear Cache.

Reboot and see if that helps.

Unfortunately it doesn't change anything... Am I alone to have this problem ?
I've also tried to reset settings and done these tests on several movies, same result...

[sugatam]

(09-23-2010 04:12 PM)jamos Wrote:  Ya all True-hd blurays have a AC3 track also. They have to, as said before there is no core like DTS-MA/HD.

Yes, and my complaint is that if that AC3 track happened to be an interleaved track, the A200 can't access it.

[werner]

are you streaming over network? if so what protocol, could you try to play a file which has issue from a usb drive or a local hdd?

(09-23-2010 06:37 PM)elfeneco Wrote:  Unfortunately it doesn't change anything... Am I alone to have this problem ?
I've also tried to reset settings and done these tests on several movies, same result...

[elfeneco]

(09-23-2010 06:41 PM)werner Wrote:  are you streaming over network? if so what protocol, could you try to play a file which has issue from a usb drive or a local hdd?

1/ Yes, over a SAMBA sharing. I've also tried NFS sharing and for my case, it's worse. And with the same file stored on internal Popcorn hdd, skipping crash doesn't occur... All my movies are on my NAS, so this solution is not acceptable. But I agree, it is in connection with network matter...

2/ Second problem seems to be related to HDMI new driver ?

[makisxxx]

I have no sound through hdmi to my samsung tv LE40A656A I have change the audio settings but nothing. Am i doing something wrong?

[BENN0]

After this update I have no picture via HDMI on my Panasonic 42PZ80 plasma

Same problem with the new HDMI driver as the C-200 is currently facing I guess.

[nilis]

(09-23-2010 06:54 PM)BENN0 Wrote:  After this update I have no picture via HDMI on my Panasonic 42PZ80 plasma

Same problem with the new HDMI driver as the C-200 is currently facing I guess.

I have a Panasonic 42PV70 and I have no HDMI problems whatsoever with the new firmware (so far). Try to switch off both your TV and A200. Switch first your TV on, go to the correct input and then switch on your A200.

[Snick66]

BluRay Wall-E (full copy, BDMV) dosen't work.

firmware - suxx.

[Dave_D]

I have Wall-E BDMV...

Works here and streamed from the C200 as well.

[Snick66]

It play the biggest file, playlists don't work.

[alexsun]

Probably, I was lucky that I didn't have a chance to update firmware at all. I got ERR029 error message.

[fabry]

installed new firmware and it works very well , now i have True HD and DTS HD MA .
nice work , thank's

[elfeneco]

(09-23-2010 07:40 PM)fabry Wrote:  installed new firmware and it works very well , now i have True HD and DTS HD MA .
nice work , thank's

Should we open new threads for each problem encountered ? We are several to complain, so it might be hard to be heard in this thread

[Willem53]

(09-23-2010 07:42 PM)elfeneco Wrote:  Should we open new threads for each problem encountered ? We are several to complain, so it might be hard to be heard in this thread

Yes if you can provide details on your setup and the issue in a separate thread there is more chance to be heard and helped.