HDMI signal is out of range with TS movie?

[tmt]

I have a weird problem with this TS file on my c-200. When I start to play this file, I loose the picture from the C-200 and my screen says the HDMI signal is out of range. When I press stop, the menu re-appears after a few seconds. I have no problem with some other M2ts files, but most of my movies are mkv anyway, with which I have no problems at all. This happens with the august firmware, I haven't tested the latest firmware yet.
the file plays perfectly on my PC.
video settings on the C-200 are 1008p24.

mediafino:

Quote:General
ID : 1
Complete name : Flyboys.ts
Format : MPEG-TS
File size : 22.3 GiB
Duration : 2h 12mn
Overall bit rate : 24.1 Mbps
Maximum Overall bit rate : 35.5 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : 27
Duration : 2h 12mn
Bit rate mode : Variable
Maximum bit rate : 28.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177

Audio #1
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 2h 12mn
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 426 MiB (2%)
Language : English

Audio #2
ID : 4353 (0x1101)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Codec ID : 130
Duration : 2h 12mn
Bit rate mode : Constant
Bit rate : 1 510 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 1.40 GiB (6%)
Language : English

Audio #3
ID : 4354 (0x1102)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Format profile : MA
Muxing mode : Stream extension
Codec ID : 134
Duration : 2h 12mn
Bit rate mode : Variable
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Language : English

[T800]

Try running the file through tsmuxer and try that.
Then try demux using tsmuxer and remux with mkvmerge and try that.

[Willem53]

what interests me is what display is the C200 connected to over HDMI... what is the HDMI version on the display and on the cable?

[tmt]

well... I guess it must have been something in the august firmware, because after an update with the new one from October the movie plays fine.

My projector has HDMI 1.3, the cable is also certified high-speed deep color blabla.
When it's playing now the projector runs at 1080p50, because the movie is 25fps. Most of my other movies are 24fps, then it runs at 1080p24.

But anyway, sorry to bother you all. Should have tried the new firmware one day earlier