Threaded Mode | Linear Mode

duanep · (10-27-2010)

I've released a mipsel binary of the squeezeslave audio client for slimdevices/logitech squeezebox server, which should work on the A-100, A-110 and B-110. Only tested on my A-110.

See the url below for details.

http://forums.slimdevices.com/showpost.php?p=585253

**dc11ab** · 10-27-2010, 12:58 PM

Yet another reason why I should revive my old trusty A100!
The 200-series still lack the alsa-driver, IIRC?

Anyway, thank you - and I hope the bug for the modified version is nailed soon.

Storm01 · 10-27-2010, 09:12 PM

Hi duanep,

Thanks for this!

I just tried it, but I'm getting following message when executing squeezeslave-lnx26-mipsel-0.9-208:
PortAudio error4: Host error. Could not open any audio devices.

I'm running it on a A110.

any ideas?

duanep · 10-27-2010, 10:03 PM

You need to load either the soundcore.ko and em8xxxoss.ko modules or all the ALSA drivers including OSS support.

ene · 10-28-2010, 09:51 PM

(10-27-2010 10:03 PM)duanep Wrote: You need to load either the soundcore.ko and em8xxxoss.ko modules or all the ALSA drivers including OSS support.

I have a A100, copied the file squeezeslave-lnx26-mipsel-0.9-208 to my box,
loaded the modules that i have downloaded from http://mats.room101.no/oss/
via

Code:

busybox insmod soundcore.ko

and

Code:

busybox insmod em8xxxoss.ko

and tried to execute the squeezeslave file.

I also get the error message:
PortAudio error4: Host error. Could not open any audio devices.

Have you any suggestions? Or do you need any additional information?

Best regards.
ene.

duanep · 10-28-2010, 10:25 PM

You shouldn't need the busybox as part of the command.

insmod soundcore.ko
insmod em8xxxoss.ko

This will list the sound device if the sound modules loaded okay.

squeezeslave-lnx26-mipsel-0.9-208 -L
Output devices:
* 0: /dev/dsp

If not, perhaps Goophy can help out. The above two insmod commands are all I need on my A-110 to get it working.

fisland · 11-01-2010, 01:10 AM

(10-27-2010 12:28 PM)duanep Wrote: I've released a mipsel binary of the squeezeslave audio client for slimdevices/logitech squeezebox server, which should work on the A-100, A-110 and B-110. Only tested on my A-110.

See the url below for details.

http://forums.slimdevices.com/showpost.php?p=585253

Is there a SqueezeSlave available for C200 ?

duanep · 11-01-2010, 11:48 AM

Unfortunately, I don't have a C-200 so no squeezelsave is not available for it.

duanep · 11-05-2010, 12:05 PM

I've completed a dynamic ALSA SqueezeSlave binary. See the README in the tarball for usage details.

For download details see the first post in this thread.

grahams · 09-08-2011, 08:11 AM

Hi

I 'think' I have squeezeslave-alsa-lnx26-mipsel-1.0-237 running on my A100. I get no errors and I see the processes running. Also my squeezebox server can see the squeezeslave and I can start 'playing' music to it. However I'm at a loss as to how to hear music.

I fear I just being dumb here, but what do I need to do from the PCH end? or do I have an issue with the sound configs?

(10-27-2010 12:28 PM)duanep Wrote: I've released a mipsel binary of the squeezeslave audio client for slimdevices/logitech squeezebox server, which should work on the A-100, A-110 and B-110. Only tested on my A-110.

See the url below for details.

http://forums.slimdevices.com/showpost.php?p=585253

ketchoupi · 12-22-2012, 12:28 PM

hi

i would like to install squeezeslave on my popcorn A110 but i don't understand how to proceed?

can you explain to me step by step?

i've two defaults :

french
newbie in linux

thank for your attention.

nuzzosono · 01-28-2013, 08:34 AM

Me too, the client is runnig I can see 6 procs:
8507 root 0:02 /share/Apps/SqueezeSlave/squeezeslave-alsa -R -M/dev/null
8508 root 0:00 /share/Apps/SqueezeSlave/squeezeslave-alsa -R -M/dev/null
8509 root 0:00 /share/Apps/SqueezeSlave/squeezeslave-alsa -R -M/dev/null
8524 root 0:00 /share/Apps/SqueezeSlave/squeezeslave-alsa -R -M/dev/null
8525 root 0:00 /share/Apps/SqueezeSlave/squeezeslave-alsa -R -M/dev/null
8526 root 0:02 /share/Apps/SqueezeSlave/squeezeslave-alsa -R -M/dev/null

but there is no sound coming from the pch.

I tried both the digial audio and analog output.

Can you help?

p.s. do I have to load the alsa libs every time I boot the pch?

(09-08-2011 08:11 AM)grahams Wrote: Hi

I 'think' I have squeezeslave-alsa-lnx26-mipsel-1.0-237 running on my A100. I get no errors and I see the processes running. Also my squeezebox server can see the squeezeslave and I can start 'playing' music to it. However I'm at a loss as to how to hear music.

I fear I just being dumb here, but what do I need to do from the PCH end? or do I have an issue with the sound configs?

(10-27-2010 12:28 PM)duanep Wrote: I've released a mipsel binary of the squeezeslave audio client for slimdevices/logitech squeezebox server, which should work on the A-100, A-110 and B-110. Only tested on my A-110.

See the url below for details.

http://forums.slimdevices.com/showpost.php?p=585253

nuzzosono · 01-28-2013, 02:01 PM

If I run squeezeslave without -M/dev/null I get this error when I try to play something:

Expression 'PaOssStream_Prepare( stream )' failed in 'src/hostapi/oss/pa_unix_oss.c', line: 1611

Wim57 · 03-16-2013, 08:36 AM

I'm also struggling without result yet. SqueezeSlave seems to be playing but no sound.

I see no /dev/snd and 'aplay -l' reports only null device.
Searching forums I found that maybe I need a sndddevices script to install but that is nowhere to be found.
And what about am8xxxalsa.ko? Must have some use because it is included in the download but I can't insmod because of invalid format.

Using PCH as SqueezeSlave would be a nice 'second life' for it but seems to be a mission impossible.

Wim

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	PopCorn MKV AudioConverter	HeartWare	1,763	1,541,344	05-25-2013 05:31 PM Last Post: HeartWare
	Shairport (emulator airport express) on popcorn	lololo	8	5,246	09-17-2012 09:34 PM Last Post: LordHelmchen
	Support thread for HeartWare's PopCorn MKV Chapter Maker	HeartWare	72	45,799	01-01-2012 10:10 AM Last Post: halfelite
	Litepodder v1.0.0 for Popcorn Hour A-100/A-110/B-110 (podcast downloader)	philofred	117	40,801	04-05-2011 03:17 AM Last Post: jasch
	Wake up NAS from Popcorn	mrfac	36	23,906	03-10-2011 02:56 PM Last Post: mad1812
	Setting up Popcorn Hour to Logitec Harmony Remote	collingwood	5	9,791	12-30-2010 08:54 AM Last Post: halfelite
	Popcorn does not see Twonky or PS3 Media Server	rgn2000	0	3,329	09-02-2010 09:14 PM Last Post: rgn2000
	SqueezeSlave for PopCorn (??)	jjnh	0	2,495	08-20-2010 06:57 PM Last Post: jjnh
	gedit for popcorn hour?	hakank22	5	3,766	05-23-2010 06:22 AM Last Post: hakank22
	aMule 2.2.3-2 build for NMT Popcorn Hours [updated 3/31/2009]	empatico	59	35,736	03-01-2010 06:19 AM Last Post: fancyboy2k