[NMJ v1] NMJToolbox - A Windows editor for the NMJ (Updated 15/10/2012 v1.0.4.6)

[congo181]

Cyrus,

Yes, you now have to set scanning to manual on the PCH so that it will not try to refresh the database.
Once you have the databse set as you want using the toolbox, you no longer need to use NMJ to scan.

I dont think you can change anything about how NMJ displays yet, but there have been many requests for some transparency to allow the poster to be displayed, so who knows what will happen in the soon to be released firmware.

Congo

[Alaa]

(03-09-2011 09:03 AM)congo181 Wrote:  Cyrus,

Yes, you now have to set scanning to manual on the PCH so that it will not try to refresh the database.
Once you have the databse set as you want using the toolbox, you no longer need to use NMJ to scan.

I dont think you can change anything about how NMJ displays yet, but there have been many requests for some transparency to allow the poster to be displayed, so who knows what will happen in the soon to be released firmware.

Congo

Hi,
OK so I set the PCH to scan in manual.
But I then added a few more movies to the disk.
How do I get the NMJ toolbox to add these to the database? They do not appear when I open the existing media.db file. I thought the Refresh button would do it but it doesn't.
What am I missing?
thanks

[cyrus2007]

(03-09-2011 09:03 AM)congo181 Wrote:  Cyrus,

Yes, you now have to set scanning to manual on the PCH so that it will not try to refresh the database.
Once you have the databse set as you want using the toolbox, you no longer need to use NMJ to scan.

I dont think you can change anything about how NMJ displays yet, but there have been many requests for some transparency to allow the poster to be displayed, so who knows what will happen in the soon to be released firmware.

Congo

Hi thank you for the info, one final question you say that you do not need to use the NMJ to scan. Is there a way for example when i click on the links to either my network folders or the stored films on my internal Hard drive that instead of the folders appearig where at that point i would press the red button to run NMJ that this could be done automatically?

[congo181]

(03-09-2011 10:25 PM)Alaa Wrote:  Hi,
OK so I set the PCH to scan in manual.
But I then added a few more movies to the disk.
How do I get the NMJ toolbox to add these to the database? They do not appear when I open the existing media.db file. I thought the Refresh button would do it but it doesn't.
What am I missing?
thanks

In NMJ Toolbox, under the Video Tab, click New to add a new movie to the database.
Then add the file(s) of the movie you want to add using the Modify Episodes window. For most movies, this is just the one movie file.
You should then be able to use the NMJT scanner to look at the IMDB database to find and add all the relevant Movie data. You do this by either searching by the movie name, or by entering the correct TT code.

All done.

---

(03-09-2011 10:29 PM)cyrus2007 Wrote:  Hi thank you for the info, one final question you say that you do not need to use the NMJ to scan. Is there a way for example when i click on the links to either my network folders or the stored films on my internal Hard drive that instead of the folders appearig where at that point i would press the red button to run NMJ that this could be done automatically?

This is not something I have tried, but I believe that it is possible to run NMJ automatically using an html file. I don't know if it will work with different storage locations as I have not tried it myself.
I think this is the thread you want to look at for the answers..
http://www.networkedmediatank.com/showth...?tid=46189

[jcfay]

Has anyone installed the new c-200 firmware yet and noticed any issues at all with NMJToolbox- managed versions of NMJ? I've been happy over the last few months with NMJ working fine (thanks to the toolbox) but really, REALLY don't want to undo any of my work with the new firmware update?

[congo181]

(03-12-2011 01:51 PM)jcfay Wrote:  Has anyone installed the new c-200 firmware yet and noticed any issues at all with NMJToolbox- managed versions of NMJ? I've been happy over the last few months with NMJ working fine (thanks to the toolbox) but really, REALLY don't want to undo any of my work with the new firmware update?

I am using the new firmware, and have continued using NMJT to update my database.
As long as you dont use the NMJ to scan or update no harm will be done to what you have.

[TonyAitch]

Rom, since I have using NMJT to add new movies (without using the infernal and slow NMJ update process) I have noticed some of my movies don't play from the wall, but instead I have to go the list view, where they play fine. I suspect it is because of the file I point to when first loading the film into the NMJT. Does that make any sense?

Ta,
Tony

[jcfay]

(03-12-2011 03:40 PM)congo181 Wrote:  I am using the new firmware, and have continued using NMJT to update my database.
As long as you dont use the NMJ to scan or update no harm will be done to what you have.

+1 here. New firmware up and running without issues

[Rom]

(03-12-2011 06:45 PM)TonyAitch Wrote:  Rom, since I have using NMJT to add new movies (without using the infernal and slow NMJ update process) I have noticed some of my movies don't play from the wall, but instead I have to go the list view, where they play fine. I suspect it is because of the file I point to when first loading the film into the NMJT. Does that make any sense?

Ta,
Tony

When you say 'list view' do you mean in the NMJ or the standard UI?

If the file plays in list view in the NMJ but not in wall/category view then it is because your images are too large for the thumbnails and the NMJ is using up the memory so the files will not play. I have reported this to the devs and the fix is to bulk resize your thumbnails (I use EasyImageModifier) to 124 x 185.

If you mean they won't play from the NMJ at all, in any view then I would need more details like is it a single file rip, folder rip, where it is on your network, what is in the PATH column in the episode tab for the entry.

[TonyAitch]

(03-12-2011 07:07 PM)Rom Wrote:  

(03-12-2011 06:45 PM)TonyAitch Wrote:  Rom, since I have using NMJT to add new movies (without using the infernal and slow NMJ update process) I have noticed some of my movies don't play from the wall, but instead I have to go the list view, where they play fine. I suspect it is because of the file I point to when first loading the film into the NMJT. Does that make any sense?

Ta,
Tony

When you say 'list view' do you mean in the NMJ or the standard UI?

If the file plays in list view in the NMJ but not in wall/category view then it is because your images are too large for the thumbnails and the NMJ is using up the memory so the files will not play. I have reported this to the devs and the fix is to bulk resize your thumbnails (I use EasyImageModifier) to 124 x 185.

If you mean they won't play from the NMJ at all, in any view then I would need more details like is it a single file rip, folder rip, where it is on your network, what is in the PATH column in the episode tab for the entry.

Sorry, Rom, I meant the standard UI (I didn't even know there was a list view in NMJ, since I use only the wall to let my daughter pick movies).

I have everything in my server in full 1:1 rips, both DVD (VOB) and BD (M2TS). I point to the first file in the VIDEO_TS or STREAM file folders.

Thanks,
Tony

[Rom]

So what is in the PATH column of oneof the ones that won't play?

Also, what drive letter is in the 'Actual NMT drive' combo at the top of NMJT and does NMJT pick this automatically or are you setting it?

[mfsav2]

Rom,
sorry to bother but when I open my db without music:

Code:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
   at System.Collections.ArrayList.get_Item(Int32 index)
   at System.Windows.Forms.DataGridViewSelectedCellCollection.get_Item(Int32 index)
   at NMJToolbox.frmMain.DisplayThumb()
   at NMJToolbox.frmMain.UpdateSelected()
   at NMJToolbox.frmMain.RefreshDataView()
   at NMJToolbox.frmMain.tabControl1_SelectedIndexChanged(Object sender, EventArgs e)
   at System.Windows.Forms.TabControl.OnSelectedIndexChanged(EventArgs e)
   at System.Windows.Forms.TabControl.WmSelChange()
   at System.Windows.Forms.TabControl.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
NMJToolbox
    Assembly Version: 1.0.3.1
    Win32 Version: 1.0.3.1
    CodeBase: file:///G:/NMT/NMJ/NMJToolbox/NMJToolbox.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Data.SQLite
    Assembly Version: 1.0.65.0
    Win32 Version: 1.0.65.0
    CodeBase: file:///G:/NMT/NMJ/NMJToolbox/System.Data.SQLite.DLL
----------------------------------------
System.Data
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Transactions
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.EnterpriseServices
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/Windows/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

[TonyAitch]

(03-13-2011 11:44 AM)Rom Wrote:  So what is in the PATH column of oneof the ones that won't play?

Also, what drive letter is in the 'Actual NMT drive' combo at the top of NMJT and does NMJT pick this automatically or are you setting it?

I edit the database through Remote Desktop Connection directly into my WHS server, and my shares are on drive D, which I always make sure is toggled, even though I keep all media files in the NMJ database folder.

I don't see a PATH column in the video tab except for the pictures. In the episodes tab I just see the name of the movie in the PATH column.

[Rom]

(03-14-2011 01:36 AM)TonyAitch Wrote:  

(03-13-2011 11:44 AM)Rom Wrote:  So what is in the PATH column of oneof the ones that won't play?

Also, what drive letter is in the 'Actual NMT drive' combo at the top of NMJT and does NMJT pick this automatically or are you setting it?

I edit the database through Remote Desktop Connection directly into my WHS server, and my shares are on drive D, which I always make sure is toggled, even though I keep all media files in the NMJ database folder.

I don't see a PATH column in the video tab except for the pictures. In the episodes tab I just see the name of the movie in the PATH column.

The path column is only in your Episode tab. It seems that you have the movie in the root of your share, is this correct?

You don't need to edit via remote desktop but you do need to make sure your drives are mapped correctly otherwise it will get the path wrong. I am sure that it is this that you have set incorrectly. Without all of the details I have asked for I can't really help you.

@mfsav2 - your error may be due to an error in my jump to code which I should have fixed on the next release.

[TonyAitch]

Not sure you'll be able to see this clearly, but here is a screen shot of the episode entry for Mamma Mia (which hangs on the Universal logo), showing the path as just the folder name, along with the directory tree of my WHS D:\shares\movies files:



Uploaded with ImageShack.us