Help needed please NO SIGNAL ERROR

[shaneyboy_x]

Hi,
I have been using my a110 for over a year now and have had no problems really. I turned the unit on this evening as normal, the popcorn loading screen appeard then the screen went black and displayed the TC error code 'no signal'
I have tried taking out all the leads, etc but still no good.
The HD still conncts to the PC and I am able to view all the data from there.

Any ideas as to what this may be, and any ideas as to how this can be fixed?
Many thanks[/font]

[ekina]

I have same problem. I have Philips 42" 8654 and Toshiba 32" LCD TV. When I use A110 with Toshiba TV, There is no problem but, when I connect A110 with Philips, screen goes black and display code "No signal". I also can not use IR. I've changed HDMI cable but it's still same problem. By the way, I can play Xbox360 with HDMI on Philips LCD TV.

What is the Problem?

[BanditRider]

These types of problems are almost always due to the A-110 outputting a video mode that's not supported by your TV.
Try the TV-Mode procedure described here: http://www.networkedmediatank.com/wiki/i...hp/TV_Mode
Patience is needed here. Press the TV-Mode button and release it, wait a second or so then press the number for the mode you want to try then wait several seconds for the TV to sync up (this can take a while so give it some time).

If this doesn't work, then it's usually the HDMI cable or connection. Make sure it's firmly plugged into the connector. Pull it out and push it in a few times.

[ekina]

Thanks for reply but It didn't solve my problem.Finally, I downgraded 30/10/2009 firmware and now It's ok. I think, there is a bug in the last firmware.