[Bug] Black screen at 1080P worked fine!

[kyller]

I dont get it.

My popcorn c200 always had the resolution 1060P 60hz, today when i tuned on the tv ans popcorn it was black.

First i thought it was the hdmi port, so i changed the port and cable, but nothing happend.

When i plugged in the compesite cable i had input. The problem is that if it stands on 1080i and all resolutions bolow that it works, but when i put it on 1080P the screen turns black?

How is this possible? I turned my ps3 on and my tv display's 1080p so its not my screen. Tryed it on an other screen and still the same problem?

What can i do? anyone got a idea?

[Pain]

What TV do you have it connected to?

I have a Panasonic TX-42PX80, and if I set my A200 to 1080P50Hz I also get black. I normally use 720P50Hz and that works fine.

If I connect it via my Onkyo AVR I get picture, but the picture is unstable, flickers, and I get red horisontal lines flickering all over the screen.
I will try changing the HDMI cable before calling it an error.

/P

(11-19-2010 11:24 PM)kyller Wrote:  I dont get it.

My popcorn c200 always had the resolution 1060P 60hz, today when i tuned on the tv ans popcorn it was black.

First i thought it was the hdmi port, so i changed the port and cable, but nothing happend.

When i plugged in the compesite cable i had input. The problem is that if it stands on 1080i and all resolutions bolow that it works, but when i put it on 1080P the screen turns black?

How is this possible? I turned my ps3 on and my tv display's 1080p so its not my screen. Tryed it on an other screen and still the same problem?

What can i do? anyone got a idea?

[kyller]

(11-20-2010 12:00 AM)Pain Wrote:  What TV do you have it connected to?

I have a Panasonic TX-42PX80, and if I set my A200 to 1080P50Hz I also get black. I normally use 720P50Hz and that works fine.

If I connect it via my Onkyo AVR I get picture, but the picture is unstable, flickers, and I get red horisontal lines flickering all over the screen.
I will try changing the HDMI cable before calling it an error.

/P

Ok i got it working again on 1080p 24 Only i got an other problem. I updated to the last firmware only nou the sound doesn'd com out the AVR if its set to passtrough. Only when i set it to downmix the stereo sound is outputted

[pxspicard]

same problem for me, only setting the video output to 1080p 24 I have now random black screen. Also changing the HDMI cable and port (on the TV) didn't solve the issue.
Last firmware installed (I didn't try the downgrade).

[Pain]

(11-20-2010 12:00 AM)Pain Wrote:  What TV do you have it connected to?

I have a Panasonic TX-42PX80, and if I set my A200 to 1080P50Hz I also get black. I normally use 720P50Hz and that works fine.

If I connect it via my Onkyo AVR I get picture, but the picture is unstable, flickers, and I get red horisontal lines flickering all over the screen.
I will try changing the HDMI cable before calling it an error.

/P

My problem was solved by changing HDMI cable, from an expensive 1.4 cable to the cheapest no-name cable I could find

[pxspicard]

(12-13-2010 10:56 PM)Pain Wrote:  My problem was solved by changing HDMI cable, from an expensive 1.4 cable to the cheapest no-name cable I could find

Also in my case, no more black screen or not perfect playback changing again the HDMI cable with a new one.

[chris57]

I started getting a black screen when I updated my TV from a 1080i/720p TV to a 1080p 24p TV.

I initially used the settings 1080p/24 with NTSC/PAL/24p for video ooutput.
When playing a PAL file it would give me a black screen at times.

Solved it by setting the video output to 1080p/50 with NTSC/24p in autoframerate. No problems any longer and all video is output at correct rate according to input files fps.

---

^^^^ Only for EU TV's.