Multiple FTP-user accounts

[AlramEast]

I'd like to have multiple FTP accounts on my PCH a-110, with the ability to set different rights and what folders the accounts should have access to.

Shouldn't be impossible, right?

If there's a way I can edit this from telnet, just point the way.

[dc11ab]

There are some hints on how to do this here:
http://www.networkedmediatank.com/wiki/i...nal_Drives
But not explicitly on how to add more users.
Some man page should help:
http://linux.die.net/man/8/pure-pw

(You do this at your own risk, of course. If something fails you can probably do a 'Typical' NMT Apps-reinstall, though.)

Another approach is to install another ftpd, like LundFTPd (available via CSI for 100-series too I think). Then you can have full control, more options and even change the settings remotely via FTP, by logging in with admin account.

[ciao]

http://www.networkedmediatank.com/showth...#pid114256

This one worked nicely for me, got 3 ftp accounts with access to different folders surviving reboots too. Be sure to check the next few posts, the howto survive a reboot is a little further down.

[gjspier]

Hi guys,

I checked out all forum contribution about this. But first thing I run into is that /mnt/syb8634/ directory is not available on my nmt. I have a A210 and are connected via telnet (putty) with the device.

Hope you can help me out what I'm doing wrong. I spend lot's of hours allready.

Thanks!
GJ

[dc11ab]

@gjspier you are looking in the wrong section of the forum. This thread is in the 100-section, the NMT you have is a 200-series.

But basically I think - IIRC - that the procedure is the same, but the PATH is different. If you are inside with telnet you can use the `find' command to look for the "pure-pw" file/binary.