[C-200] Firmware 02-04-110308-21-POP-408 (02-04-101104-21-POP-408 Apps) (11.03.2011)

[tobbelobbe]

(03-18-2011 03:03 AM)Pain Wrote:  Can't you just try it and see if it works?

(03-17-2011 11:18 PM)eewoke Wrote:  

(03-17-2011 07:38 PM)tobbelobbe Wrote:  Since my question didn't get an answer in previous post:
Is subtitle support for 3D implemented? If not, will it be?

+1 Can it be done??

I have of course tried with a regular SRT on an MKV (3DSBS), and that didn't work for me. It splits the subtitle lines in half over the two sides, making it impossible to read.

Werner: Is there a setting somewhere? Is subtitle support in the plan for 3DSBS? Or isn't it?

[halfelite]

you all could use this tool.

http://www.networkedmediatank.com/showth...?tid=47904

[andreofgyn]

What, even if you rename the file, still no 3DSBS subtitle support?

I'm waiting for a-200 firmware and I'm so disappointed with this notice

The ass tool is no go for me, if you just convert the subtitle and put on the movie dir, the size of subtitle is a problem, to fix, you must mux the subtitle with custom font and it's so painful!!!

Still waiting for a TRUE 3DSBS media player.

[GMUGNIER]

Downloaded and works well after rebuilding all of my DB's - 12 TB's of movies and great improvement on speed - just wish multi - disk was natively supported.

[halfelite]

is there a device that supports srt subs for 3d?

[koeletom]

(03-17-2011 10:00 PM)NuFFniet Wrote:  Will Sybas ever release an official iPhone remote app which works well? Plzz not via upnp but something native on the C-200 itself.. Just curious.....Werner?

Yes there is a quite decent one called NMTremote.
Downloadable via the the apps store.
I believe it is upnp though, but it works flawlessly for me
You have to install the lundman shell via CSI though.

Cheers

Tom

[Xleon]

(03-14-2011 09:03 AM)Xleon Wrote:  Installed March 11 firmware - went to NMJ to update the database, it got as far as "Verifying Database" and hung.

Tried again several times today and the Popcorn hangs on "Verifying Database" but I can hear no drive activity. After 20 mins I gave up. The Popcorn still works, but as soon as you try to do something with the message on the screen it hangs completely and requires a power-off.

I don't want to rebuild the entire database from scratch as it will take millions of hours (*estimated) like it did last time. Anyone else come across this?

[andreofgyn]

(03-19-2011 01:10 AM)halfelite Wrote:  is there a device that supports srt subs for 3d?

The media center part of my Samsung pn50c8000 do the job.

[eksi]

(03-16-2011 06:11 PM)Dave_D Wrote:  

(03-16-2011 06:01 PM)wolf1976 Wrote:  I have one simple question about this new release.....
Is this means that I can reproduce an 3D mkv film and watch it on my plasma in 3D even if my plasma is not a 3D tv??
Off course I don't have a 3D glasses,so i don't know if it could work if I'm gonna buy a pair of it.

Simple answer is no.

3D TV is required.

---

Hi Dave, how about a 3D-ready 720p projector like acer H5360?

[eewoke]

(03-18-2011 02:16 PM)andreofgyn Wrote:  What, even if you rename the file, still no 3DSBS subtitle support?

I'm waiting for a-200 firmware and I'm so disappointed with this notice

The ass tool is no go for me, if you just convert the subtitle and put on the movie dir, the size of subtitle is a problem, to fix, you must mux the subtitle with custom font and it's so painful!!!

Still waiting for a TRUE 3DSBS media player.

Indeed...how on earth can they claim 3D MKV support...very...very...VERY disappointed. Yes I use the tool already...but that is not the point. Shouting to be the first with 3D MKV support and no 3D subtitle support is very silly. I could change to 3D SBS with a simple button on my remote.

[Mariandvd]

I have a problem with the new firmware. Maybe you can help me. The problem is that when i do a hardreset on Pch-c200 and when i go to network browser it show up my sharring from pc (EX: Workgroup\My usernname) I play a movie and if say i stop the movie and go to network broswer again it does not show my network sharring (EX: Workgroup\My usernname). Only hardreset do the job.
On last firmware this was not a problem. Network configuration is like this. On pc i have two network cards, one is for the internet (Dhcp Auto) and the other network card is configured to: Allow other network users to connect through this computer's internet conection. On the Pch-c200 the network is connected to auto ip and it works. When i put it on manual ip and configured 192.168.0.10, 255.255.255.0, 192.168.0.1, 192.168.0.1 internet is working on Pch-c200 on youtube and apps but when i go to network broswer i don't see my network sharring, even after hardreset. Olso on this firmware some documentaries mkv files, have frame shuttering throu network sharring and the same file played from Pch-c200 do not have so much shuttering but still the shuttering it still is there, not playing fluid. I played a Bluray movie (20 GB) from network and it played fine, no shuttering at all, i neet to test some more files mkv to see how it plays. I do not want to go to previous firmware, i want to stay to the new firmware, i think that you upgrade the firmware to a better one and i was happy with the firmwares updates so faw. i updated only from Pch-c200 with the update online option. Sorry from posting here, but i want to be able to fix my sharring problems

[Burnerbum]

Does anyone know if the 3D will work with any 3D ready sets. I know DirecTV 3D doesn't work with the Vizio 3D set . I didn't realized there were different types of 3D out there. Also, does the PCH support BR 3D movies?

I haven't bought a 3D set yet but want to make sure I get a compatible one.

Thanks,

[markobrien]

Thanks for all your work on this!

[thewonderer]

Thanks for the new firmware. Always appreciate bug fixes and improvements.

Is it possible for the next release to have some of the features as options rather than forced as default? For instance the 2x sound when fast forward and the auto forced subtitles? Could those be options that can be enabled and disabled? Also, would it be possible to show the time/seek bar when you fast forward / jump in a video for a few seconds so you can see how far you are through the video?

thanks

[MrNoop]

(03-19-2011 06:36 AM)eksi Wrote:  

(03-16-2011 06:11 PM)Dave_D Wrote:  

(03-16-2011 06:01 PM)wolf1976 Wrote:  I have one simple question about this new release.....
Is this means that I can reproduce an 3D mkv film and watch it on my plasma in 3D even if my plasma is not a 3D tv??
Off course I don't have a 3D glasses,so i don't know if it could work if I'm gonna buy a pair of it.

Simple answer is no.

3D TV is required.

---

Hi Dave, how about a 3D-ready 720p projector like acer H5360?

Hi Eksi!
I'm try connect directly C200>3DTV :it ' worked well
But the connect direct C200>3D-ready-DLP-projector :it's not worked
System requirement in Nvidia :
http://www.nvidia.com/object/3d-vision-r...ments.html
>> No-any 3D-ready-projector have a HDMI1.4-3Dvision support
Anything's wrong ???