[C-200] Firmware 03-04-110530-21-POP-408 (03-04-110520-21-POP-408 Apps) (3.06.2011)

[Napo]

[SOLVED] I had to create

Well ..
Firmware upgrade went well, apps install also (on a new formatted USB stick)

Then I installed NetworkMounter via Community Installer to map 2 network NAS on the USB stick, in order to create a single jukebox, with the same config.ini as used previously with the previous firmware.

My problem is that non of the NAS will map with the same parameters as used before !

Any ideas ?

Thanks

Napo

[chris57]

Wasn't there a note about blackscreen with m2ts files if using BT601 or something.

We are still waiting for the Auto colourspace setting for the C200.

[Padavan]

chris57
I guess, this problem only is autosync turned on. HDMI switched from 1080p24 to 1080p60 and back (for 50/60 fps playback). Sometimes this switching is holded and process syb_framework is deadlocked.

[werner]

hmm never had such issue but i use maybe other settings then you

1080p60 is what i use
Frameratesync is NTSC/PAL/24p

Regards,
Werner

(06-07-2011 02:20 PM)Padavan Wrote:  chris57
I guess, this problem only is autosync turned on. HDMI switched from 1080p24 to 1080p60 and back (for 50/60 fps playback). Sometimes this switching is holded and process syb_framework is deadlocked.

[sjongeurts]

I tried the steps on updating to this firmware. i keep on getting error059 after crc check. I did not install ltu. I never heard of the application. I removed all my applications in the apps market. There was only youtube, twitter, revision 3 and weatherbug application on it. I reinstalled firmware. I did reset to factory default settings. Also cleared cache. I keep on getting the error.

[werner]

as i said if it failed then no need to retry, it can't work after the first fail, please send me your mac over PM, it should get resetted next day because it is already night in penang.

Regards,
Werner

(06-07-2011 03:04 PM)sjongeurts Wrote:  I tried the steps on updating to this firmware. i keep on getting error059 after crc check. I did not install ltu. I never heard of the application. I removed all my applications in the apps market. There was only youtube, twitter, revision 3 and weatherbug application on it. I reinstalled firmware. I did reset to factory default settings. Also cleared cache. I keep on getting the error.

[sjongeurts]

I have sent the PM. I will try tomorrow again after my mac adress has resetted.

[RedHat]

Just curious....why is it not possible to downgrade with a step-stone firmware?

And what happens if a user tries?

[ppp2009]

I am getting error012 while download firmware image. What is that error code?

[werner]

http://www.networkedmediatank.com/wiki/i...rror_Codes

seems to be a corrupt download

[chris57]

(06-07-2011 02:38 PM)werner Wrote:  hmm never had such issue but i use maybe other settings then you

1080p60 is what i use
Frameratesync is NTSC/PAL/24p

Regards,
Werner

(06-07-2011 02:20 PM)Padavan Wrote:  chris57
I guess, this problem only is autosync turned on. HDMI switched from 1080p24 to 1080p60 and back (for 50/60 fps playback). Sometimes this switching is holded and process syb_framework is deadlocked.

I've had it but found a workaround for my TV.

Instead of using 1080p/24 or 1080p/60 with 24p/PAL/NTSC and getting the occasional blackout I changed to the following and dont get them anymore:
1080p/50 with 24p/NTSC.
Still get the correct output to match the input fps and no blackouts. I've been pushing those settings due to this blackout bug for sometime. I seem to recall a little chat on it and perhaps PAL being the culprit in the autoswitch. Could be old age though

[rvdet]

Can't this be made easier ?


Your message scremaing is: Mediatanks are not for the masses.

I guess the industry has to grow up and make it verrrrry easy for a lot of customers / App makers.

Only this way you can get a foothold in the media / TV landscape.

[accident]

Could what be easier? The firmware procedure? The masses are fine, it's everyone else that isn't.

[plm]

(06-07-2011 05:41 PM)accident Wrote:  Could what be easier? The firmware procedure?

Did you not read Werner's instructions on page 1? Remove your HDD where your NMT apps are installed?

No-one should be expected to do this on a consumer device for something as simple as a firmware update.

And this is for users that didn't have CSI installed, so for regular users that bought a product off the shelf and expected to use it, not people that have been hacking around with the unit.

[halfelite]

(06-07-2011 06:15 PM)plm Wrote:  

(06-07-2011 05:41 PM)accident Wrote:  Could what be easier? The firmware procedure?

Did you not read Werner's instructions on page 1? Remove your HDD where your NMT apps are installed?

No-one should be expected to do this on a consumer device for something as simple as a firmware update.

And this is for users that didn't have CSI installed, so for regular users that bought a product off the shelf and expected to use it, not people that have been hacking around with the unit.

What consumer device do you upgrade the firmware on? that does not have steps you need to take . Every device I own that does not have a pc that flashes the firmware has pre steps to take to ensure a safe flash. And this was just one time that this has to be done in 2 years.