[A1xx/200/300/400*] CouchPotato/SickBeard

[jhmiller]

It should, i would say send me your config but going away for 2 weeks tomorrow so wont have time to check it. You could post it here and other users may spot a problem with it.

[astronyu]

The log might be too long to paste here.
I uploaded it online instead. Please do take a look and hopefully someone can tell me what's wrong.

https://www.sugarsync.com/pf/D196136_8561977_198559

[NaaN]

I see a lot results beeing skipped not beeing the required quality. Also some errors where CouchPotato can't download the needed nzb.

Do the downloads shown in "blue" meet your requirements ? or are they of lesser quality ?

[astronyu]

Yes, the downloads shown in "blue" met my requirements.

FYI, I just use the default best option from the quality to look for.

[astronyu]

Somehow it magically downloaded the movie. I just have the machine restarted after CP refuse to load the page.

[NaaN]

(07-20-2012 07:22 PM)astronyu Wrote:  Somehow it magically downloaded the movie. I just have the machine restarted after CP refuse to load the page.

Call me paranoia, but I'm kinda thinking that V2 needs a restart after every change to the settings.

[astronyu]

(07-20-2012 08:29 PM)NaaN Wrote:  

(07-20-2012 07:22 PM)astronyu Wrote:  Somehow it magically downloaded the movie. I just have the machine restarted after CP refuse to load the page.

Call me paranoia, but I'm kinda thinking that V2 needs a lot of restart after every change to the settings.

changed the word to reflect how it is..hehe

[Pierskw]

There is a new update for my A210: Popcorn Hour A-200/A-210 03-04-120727-21-POP-411-000

can i install this update and dont lose my sicbkeard installation ?

[rvdet]

would be handy to set retention for newsgroups and torrents to different settings.

[jhmiller]

(08-02-2012 08:28 AM)Pierskw Wrote:  There is a new update for my A210: Popcorn Hour A-200/A-210 03-04-120727-21-POP-411-000

can i install this update and dont lose my sicbkeard installation ?

It wont wipe the install but will stop it from wroking as every firmware update re-writes the files used to start CSI apps. I normaly just re-install an app to get it working again.

(08-02-2012 11:13 PM)rvdet Wrote:  would be handy to set retention for newsgroups and torrents to different settings.

Does torrents use retention??

[rvdet]

(08-02-2012 11:13 PM)rvdet Wrote:  would be handy to set retention for newsgroups and torrents to different settings.

Does torrents use retention??
[/quote]

No, but it seems that CP does not download old(er) torrents when i set retention to 14 days (because of newsgfroups).


Or am i wrong and is the retention setting only applicable to newsgroups as you imply ?

[Cherek]

Long time no see
I haven't been following the latest developments but for now I'm forced to stop using Sickbeard for a while.
Maybe there's something wrong with the installation or config, but somehow (problably at a nightly full rescan or something) Sickbeard seems to reset some shows and starts downloading skipped/archived (in settings) episodes that have already been deleted, since they have been watched.
So I'm constantly (re-)deleting episodes every now and again. Not an ideal situation.

Also I don't know if there was any development is subliminal, or other automatic subtitle downloading. But that wasn't working to well either.

[astronyu]

jhmiller, I want to update my A210 firmware, so I guess I will need to reinstall all the nmt apps later on.
for sickbeard and CPv2, which folder should I keep?
Can I just save all the folder, update the firmware, and restore the folder again? will that works?

[jhmiller]

If not wiping the HD/USB then just update firmware and the use csi to reinstall any app you have. Firmware does not change any apps you have installed, it just removes a link in the ftp startup script that csi uses to start user apps.

You could copy that file then copy it back after the firmware up date then you would not need to re-install anything

Code:

cp /nmt/apps/etc/init_nmt /share/init_nmt
then after update
cp /share/init_nmt /nmt/apps/etc/init_nmt

I think there is also a way of doing this by just running

/share/Apps/AppInit/appinit.cgi

in telnet, but have never tried myself, may need command option.


Hope this helps.

[astronyu]

Updated my A210 firmware and nmt apps.
Restarting all apps and all EXCEPT sickbeard are working.
Still figuring out what is wrong with my SB. Maybe need a restart. Will update here later.

[updated]
As suspected. Stopped the program for a few minutes, and start it again fixed the problem.
Everything running fine..although seems like kinda sluggish..