[NMJ v2] NMJToolbox2 - Windows Editor for NMJv2 A/C300 & A400 - 1.4.0.4 Update 19/5/2013

[Paperplane]

Quote:I have removed the irrelevant lines the above 2 left are what the issue is. I assume that your media files are on the same PC that you are running NMJToolbox2 on?

If so, the paths are wrong. You do not need to have a unc path in there (ie \\PC_IP\...\....\ etc). You need to set this to what the local PC would use to access the films folder.

open windows explorer and browse to the 'Films' folder.
Once there copy what is in Windows Explorer's address bar and paste that into the 'Windows Path' for the films entry in the NMJToolbox Path settings.

Do exactly the same for TV, browse to the 'Series' folder and paste that path into the entery in NMJToolbox2 for the Series entry.

Once done, OK out and restart NMJToolbox2 (just to make sure the new settings are loaded). Try adding a film and see if it plays.

Thanks a lot I tried with a TV Show and it works. Don't have time to do more try for now.
It strange I have tried this path before.... only difference was i didn't restart NMJ Toolbox2.