User(s) browsing this thread: 1 Guest(s)
C-300: NMT apps stop when standby
|
|
12-15-2011, 01:32 PM
(This post was last modified: 12-15-2011 01:32 PM by ZenphiR.)
|
|||
|
|||
|
C-300: NMT apps stop when standby
On my previous mediaplayer (PCH 110) downloads (NZBGet) continued also in standby-mode.
Now the NMT apps from PCH C-300 seem to stop when the device is put in standby. |
|||
|
12-15-2011, 01:46 PM
|
|||
|
|||
|
RE: C-300: NMT apps stop when standby
I think you power it down. When you set the c-300 in 'standbye' is the tft-screen on or off?
2 x C-300
|
|||
|
12-15-2011, 02:31 PM
(This post was last modified: 12-15-2011 02:32 PM by ZenphiR.)
|
|||
|
|||
RE: C-300: NMT apps stop when standby
(12-15-2011 01:46 PM)stevenv2 Wrote: I think you power it down. When you set the c-300 in 'standbye' is the tft-screen on or off? Standby the TFT screen is on and the power-button is red instead of white. I just found out NZBGet is still active on standby when allready performing download. Yesterday I couldn't connect to my C-300 anymore with Samba-share or NZBGet (maybe when NMT apps aren't active they also shut down during standby? Could also be something else, will investigate furthermore). |
|||
|
05-31-2012, 05:55 PM
|
|||
|
|||
|
RE: C-300: NMT apps stop when standby
ZenphiR,
I upgraded from A110 to A300. That is not the same as your C300, but perhaps this information will help. On the A300, the behavior of the on/off button on the remote is different, as is the power indicator. The power indicator has some LEDs: Red = standby Amber (Orange) = video off white = on I wish the manufacturer would have chosen something besides red/amber because they are very hard to distinguish. There is no physical on/off switch on the A300, like there was on the A110. In standby mode (red) on the A300, the device has to boot up again when you turn it on and services are stopped. You cannot telnet or use Samba/NFS services to access files on the A300's HD. In the "video off" mode (amber/orange), the device conserves energy by shutting off display to the TV, but services will still run so you can access files. This is different than the standby mode on the A110, where standby meant that the video was off, but services were still active. When on, hold on/off button until red light blinks to put it in standby mode. Otherwise, pressing on/off just once will toggle between "on" and "video off" modes. I confirmed with the C300 manual that it also has red/amber/white LEDs like the A300. |
|||
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread: | Author | Replies: | Views: | Last Post | |
| BDR-300 - Error 10353 with C-300 | fant0pop | 0 | 147 |
05-13-2013 08:04 PM Last Post: fant0pop |
|
| Popcorn Hour C-300 App Market Problem | haQQo | 1 | 510 |
05-09-2013 10:21 PM Last Post: everestk2 |
|
| Is A-300 is over | jbejm | 13 | 695 |
05-09-2013 07:51 PM Last Post: halfelite |
|
| C-300 gets really slow while in standby | Presjar | 0 | 210 |
04-30-2013 08:46 AM Last Post: Presjar |
|
| C-300 USB ports not active | zaroff | 8 | 729 |
04-28-2013 05:53 PM Last Post: zaroff |
|
| NMT Setup Wizard: Formatting drive freezes at 46% | Markxvx | 4 | 1,729 |
04-25-2013 08:08 AM Last Post: robcio_gd |
|
| A-300 & C-300 Hardware Compatibility WiKi | chris57 | 36 | 16,038 |
04-23-2013 03:39 PM Last Post: pace508 |
|
| Help with C-300 | irish7 | 0 | 286 |
04-20-2013 10:22 PM Last Post: irish7 |
|
| A 300 via internet connection | CHESTERFIELD | 6 | 399 |
04-19-2013 04:07 PM Last Post: CHESTERFIELD |
|
| A-300 doesn't recognise HDD | klaaskox | 34 | 1,742 |
04-17-2013 08:40 PM Last Post: prettyflyBE |
|

Twitter
Facebook
NMT Wiki
Search
Member List
Help
A-400 [13 May 2013]

C-300: NMT apps stop when standby





![[+]](images/collapse_collapsed.gif)
