Twitter
Facebook
NMT Wiki
Search
Member List
HelpFirmware: 
A-400 [13 May 2013] | C-300 [30 Nov. 2012] | A-300 [30 Nov. 2012] | C-200 [21 Jan. 2013] | A-200/A-210 [10 Aug. 2012]
User(s) browsing this thread: 1 Guest(s)
 UPnP not starting
|
|
02-18-2012, 11:47 AM
 Post: #1 |
|||
|
|||
|
UPnP not starting
Hi,
On my A-200 under the nmt applications the UPnP AV sever is always stuck on "starting" and will not run. Does anyone know why this is? cheers andy 
|
|||
|
|
02-19-2012, 02:19 PM
Post: #2 |
|||
|
|||
|
RE: UPnP not starting
Using the same wizard where you install the NMT apps, there is also an option to set the "Media drive".
I'm not sure, but it could be that you forgot to do that. |
|||
|
|
|
02-19-2012, 09:22 PM
Post: #3 |
|||
|
|||
|
RE: UPnP not starting
Many thanks for your reply,
i tried this and it made no difference, do you think the unit is fauly? |
|||
|
|
|
02-23-2012, 08:36 PM
Post: #4 |
|||
|
|||
|
RE: UPnP not starting
If you mean that there is a hardware fault, then no I don't think so.
You can try a "Reset to factory settings" and see if that helps. If that doesn't help, a reinstall of the NMT apps should fix it. Try first if you can do it "Online". If you can't then you will have to do it using a USB stick. Look in the Wiki for instructions for doing this. |
|||
|
|
|||
![[+]](images/collapse_collapsed.gif)
1 user says Thank You to Pain for this post |
|
02-23-2012, 08:50 PM
Post: #5 |
|||
|
|||
|
RE: UPnP not starting
you will need to do a factory reset or a clean install of nmt apps. there is a upnp db file that can get hosed I dont remember where is resides to tell you how to rm it from telnet if you search the forums you should be able to find it.
|
|||
|
|
|||
|
1 user says Thank You to halfelite for this post |
|
02-27-2012, 02:13 PM
Post: #6 |
|||
|
|||
|
RE: UPnP not starting
Hi
A clean install of nmt apps cured the problem. Thanks everyone for your help. andy |
|||
|
|
|
10-11-2012, 01:22 PM
Post: #7 |
|||
|
|||
 RE: UPnP not starting
(02-27-2012 02:13 PM)andy402 Wrote: Hi Hi I got the same problem, with my a-200 myihome lite and upnp stucked on starting... I've updated firmware to the last release, done a factory reset then I've reinstalled apps from USB.Since the apps are on my internal disk which contains my media library I've made a typical setup since I can't erase my media library of course...any suggestions? thank you
|
|||
|
|
|
11-09-2012, 07:08 PM
Post: #8 |
|||
|
|||
|
RE: UPnP not starting
i've got the same problem. UPnP is stuck on starting. When I chose for a typical setup the pch tells me there is no update available. I don't want to do a fresh install since it will erase all my media. Help would be appreciated
|
|||
|
|
|
02-21-2013, 09:52 PM
Post: #9 |
|||
|
|||
|
RE: UPnP not starting
hi,
any news on how to fix this without loosing all the media on the hdd ? richard C200 and A200 both with 1,5 TB Samsung Green, wired 100 Mb LAN. I love those Apps: PWRC, UZG. (a WD caviar green 500Gb gave hang-ups with the C200). Sony 42W5500 with Sony 5.1 Home theatre setup and LG 37LD450. Three External HDD's of 350 Gb (1) and 500 Gb (2) on a different physical location for extra Back-Up. |
|||
|
|
|
02-21-2013, 10:03 PM
(This post was last modified: 02-21-2013 10:06 PM by halfelite.)
Post: #10 |
|||
|
|||
|
RE: UPnP not starting
if someone has time login with telnet and run a search for *.db and i cann tell you the file you need to delete and it will fix the issue. I dont have a pch in front of me at the moment. memory serves right its in /mnt
|
|||
|
|
|
« Next Oldest | Next Newest »
|