[A-300] Firmware 05-01-120118-23-POP-421 (05-01-111007-23-POP-421) (1.3.2012)

[dave_con]

(03-06-2012 05:13 AM)mrjiggles Wrote:  

(03-05-2012 10:53 PM)dave_con Wrote:  All the bugs I had generally seem to be fixed - screensaver error, as well as the failure to pick up from the "last scene played". BD ISOs seem to play okay without any problems - EXCEPT if it's a full ISO BD rip. They stutter along rather annoyingly, so I think for the time being I'll just make ISOs of the main movie, rather than the whole disc.

Hi I've been streaming around 6 BD50's without stutter at all.
So I would expect it's somewhere in your network configuration.
Regards.

Can't be! The files are all stored on a USB drive directly connected to the A300. Just in case I wasn't specific enough, what I meant was that if I use DVDFab to just make an ISO of only the movie (no menus, etc) then it works fine. So far the two full disc ISO copies I've made (movie, menus, special features, etc) have not worked very well at all.

I'll try making some more full disc ISO copies though and see if maybe it was something at the computer end...

[minazza]

I think it depends on how you do the rip

[seerdekens]

Just bought my first Popcorn (A-300) and immediately noticed the MKV subs sync issue. This is a HUGE bug because it completely ruins your movie experience
I'm new here, so I don't know how fast they are in fixing issues. Hope it will be fixed in a few days, otherwise I bring it back ...

[vicstefanescu]

(03-06-2012 10:21 PM)seerdekens Wrote:  Just bought my first Popcorn (A-300) and immediately noticed the MKV subs sync issue. This is a HUGE bug because it completely ruins your movie experience
I'm new here, so I don't know how fast they are in fixing issues. Hope it will be fixed in a few days, otherwise I bring it back ...

There have been 2 firmware updates since the A-300 launched and none of them included this fix, so I wouldn't hold my breath if I were you. I guess it'll be another 3 months until the next update

[Erazor]

(03-07-2012 12:41 PM)vicstefanescu Wrote:  

(03-06-2012 10:21 PM)seerdekens Wrote:  Just bought my first Popcorn (A-300) and immediately noticed the MKV subs sync issue. This is a HUGE bug because it completely ruins your movie experience
I'm new here, so I don't know how fast they are in fixing issues. Hope it will be fixed in a few days, otherwise I bring it back ...

There have been 2 firmware updates since the A-300 launched and none of them included this fix, so I wouldn't hold my breath if I were you. I guess it'll be another 3 months until the next update

Optimist

[Morten72]

(03-03-2012 12:45 PM)Knightro Wrote:  

(03-03-2012 01:54 AM)halfelite Wrote:  

(03-03-2012 12:38 AM)Knightro Wrote:  Please help. I keep getting "Failed ERR075". I tried to recover but when I tried to upgrade again to any firmware version, I will still get "Failed ERR075". What shall I do?

open a support ticket. 75 is a filed to write error

I have already filed support ticket.
This is frustrating, I can't access my NAS using the recovery firmware. I'm stuck with the recovery firmware. I hope someone can help while waiting on the support's reply.

I get the same error after about 10% of programming..

[plm]

(03-06-2012 10:21 PM)seerdekens Wrote:  Just bought my first Popcorn (A-300) and immediately noticed the MKV subs sync issue. This is a HUGE bug because it completely ruins your movie experience
I'm new here, so I don't know how fast they are in fixing issues. Hope it will be fixed in a few days, otherwise I bring it back ...

Don't hold your breath. They haven't been able to fix this on the 200 series in a couple of years so far. Quite why it's been so difficult is beyond me.

[Kir]

(03-07-2012 08:15 PM)Morten72 Wrote:  

(03-03-2012 01:54 AM)halfelite Wrote:  open a support ticket. 75 is a filed to write error

I get the same error after about 10% of programming..

Then do the same - open a support ticket. What's the point of your post?

[minazza]

guys is it possible to load an external audio during the vision of a movie? I mean I have a movie on a file and on another file I have the audio track, is it possible to lo start the movie with the audio on a separate file?

[chris57]

(03-08-2012 04:14 PM)minazza Wrote:  guys is it possible to load an external audio during the vision of a movie? I mean I have a movie on a file and on another file I have the audio track, is it possible to lo start the movie with the audio on a separate file?

Not a firmware question really now is it.

It's not possible, please ask questions in the Audio section of the 300 forum or other section depending on your subject.

[seerdekens]

Can someone please confirm: the MKV subs sync issue only occurs when DTS is set to passthrough?
A workaround (awaiting a fix) is to set it to "downmix" ?
I read it in this thread but not sure this solves it for everybody.

[cyberke]

(03-08-2012 05:07 PM)seerdekens Wrote:  Can someone please confirm: the MKV subs sync issue only occurs when DTS is set to passthrough?
A workaround (awaiting a fix) is to set it to "downmix" ?
I read it in this thread but not sure this solves it for everybody.

I Use downmix, audio over HDMI and do not have any sync problem.

[minazza]

I have problems also in downmix guys

[Diablo333]

Only workaround is to set you're sub language in de A-300 settings so it loads the subs from the start.When you watching the mkv movie don't rewind or go forward...this will make the subs out of sync.If you select the subs in the movie and it is not sync rewind a little and push the play button most of the time it's sync again.

Hope they fix this bug soon

[chymera777]

(03-02-2012 03:53 AM)halfelite Wrote:  

(03-01-2012 11:25 PM)berni1972 Wrote:  Listening of FLAC files the passtrough mode of PCM still is downmixing!!! the singnal to multichannel by hdmi... can not listen the flac files in stereo!!! They are joking with this update.

Im confused. Are you saying its not outputting multichannel but only stereo. I just tested the 5.1 flac sample located here

http://www.linnrecords.com/linn-download...files.aspx

and it outputted all 5.1 speakers on my onkyo avr.

Hello...I am having the same problem and i made a thread with pictures

please have a look

http://www.networkedmediatank.com/showth...?tid=59259

thanks.

---

(03-02-2012 03:53 AM)halfelite Wrote:  

(03-01-2012 11:25 PM)berni1972 Wrote:  Listening of FLAC files the passtrough mode of PCM still is downmixing!!! the singnal to multichannel by hdmi... can not listen the flac files in stereo!!! They are joking with this update.

Im confused. Are you saying its not outputting multichannel but only stereo. I just tested the 5.1 flac sample located here

http://www.linnrecords.com/linn-download...files.aspx

and it outputted all 5.1 speakers on my onkyo avr.

Hello...I am having the same problem and i made a thread with pictures

please have a look My AVR is ONKYO-608

http://www.networkedmediatank.com/showth...?tid=59259

thanks.