Threaded Mode | Linear Mode

matrox445 · (This post was last modified: 03-27-2012 09:41 PM by matrox445.)

Hello guys,

I'm trying to connect my new Synology DS411 nas to my A300. Nas is on DSM 4.0-2198 and A300 got the new firmware.
I've followed the wiki page here and no problem with the nas config.

But when i'm trying to acces the nas in Network Browser/NFS_Servers, there is only the A300 ip in the list.
If i go in WORKGROUP on the pch, i can see the nas but it ask me a login/password. I've try with the A300 account created during the config of the nas but i've a message "login failed".
If i try to add the share manually, i've a message "Share no longer exist".

I really don't understand what the problem... Do you have any idea ?

Thx in advance and sorry for my english !

Matrox

Edit with some screenshots : on the nas

[Image: Prt_Scr_capture.jpg]

only my A300 ip in the NFS_Servers list

[Image: IMG_20120327_223422.jpg]

ask me a login/pass but don't work with my A300 nas user...

I'm out of idea, need help...

matrox445 · (This post was last modified: 03-27-2012 08:52 AM by matrox445.)

Up ! I've try :

- enable the guest account
- rename my shared folder with no space/caps/special caracters : videos
- adding some ports in the synology firewall
- factory reset the A300
- create share manually with smb/nfs/nfs tcp

But no results...

I'm quite sure the problem is on the nas but i can't find where !

Any ideas ?

Matrox

melonboy · 03-27-2012, 07:49 PM

Have you rebooted the synology and the A300 since the changes? I had an issue like your and this helped.

matrox445 · 03-27-2012, 08:18 PM

(03-27-2012 07:49 PM)melonboy Wrote: Have you rebooted the synology and the A300 since the changes? I had an issue like your and this helped.

Hello and thx for your reply !

Yes i've rebooted both but no result, i really don't understand what's the problem...
I'm going to downgrade the A300, we'll see...

matrox445 · 03-27-2012, 09:43 PM

After a downgrade, a factory reset, an update of the firmware, still no results, i'm going crazy... I've updated the first post with screenshots if it can help...

Rom · 03-27-2012, 10:18 PM

Have you tried setting up the share on the A300 without a user name & password? NFS shares don't have them. This is what I did with my Synology and it works fine.

matrox445 · (This post was last modified: 03-27-2012 10:26 PM by matrox445.)

Problem solved with disable the synology firewall... Don't know whyh but it works, i've acces to my nas in SMB and NFS !
Doing a NMJ scan, i'll tell you the result tomorrow.

matrox445 · (This post was last modified: 03-28-2012 07:59 AM by matrox445.)

So, the NMJ database is created and i can access to all my movies on my A300.
But, the nmj navigation is VERY slow and when i play a movie, it's very laggy. When i enter a movie to see it's informations, it could take 5 minutes to show all the pictures...

Any suggestion ?

**chris57** · (This post was last modified: 03-28-2012 08:21 AM by chris57.)

That seems very strange as I have a Synology NAS, the CS407 so an older less powerful Synology NAS, and have my NMJ archive located on it. When I enter it it launches NMJ automatically and does not take 5 mins to start.

I am however using a wired manual connection as opposed to your Auto WiFi setup. WiFi is the worst possible setup for a media player, how are you finding it for streaming? IU did some testing and anything more than a SD xvid had problems streaming. Is there any chance you can use a wired ethernet connection it will benefit any media player connected to your LAN.

PS
Put a second DNS address in. Use something like 8.8.8.8 or 4.4.4.4 or openDNS addresses.

matrox445 · (This post was last modified: 03-28-2012 09:39 AM by matrox445.)

(03-28-2012 08:20 AM)chris57 Wrote: That seems very strange as I have a Synology NAS, the CS407 so an older less powerful Synology NAS, and have my NMJ archive located on it. When I enter it it launches NMJ automatically and does not take 5 mins to start.

I am however using a wired manual connection as opposed to your Auto WiFi setup. WiFi is the worst possible setup for a media player, how are you finding it for streaming? IU did some testing and anything more than a SD xvid had problems streaming. Is there any chance you can use a wired ethernet connection it will benefit any media player connected to your LAN.
PS
Put a second DNS address in. Use something like 8.8.8.8 or 4.4.4.4 or openDNS addresses.

Hi chris !

I've changed my connection to manual since the screens. It seems that i've a very low speed beetween my box and my A300, like 2mo/sec instead of 54mo/sec. Going to search this way...

Ps : i can't use ethernet since my box is not in the same room than the A300

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Problem with SMB network share with Synology 1512+ and C-200	egoego	11	3,757	Yesterday 12:34 PM Last Post: BanditRider
	NFS Access after standby	bondoo0	0	213	06-06-2013 03:36 PM Last Post: bondoo0
	A300 and unraid a happy couple?	dikkiedirk	5	298	05-30-2013 03:16 PM Last Post: Kir
	Unable to connect to NFS shared on Synology NAS	STiMPY	0	472	05-19-2013 10:25 PM Last Post: STiMPY
	Access C-300 Shell When Not On Local Network	Presjar	0	359	04-26-2013 07:14 AM Last Post: Presjar
	access to nfs share on Mac (mountain Lion)	Jehale	9	2,763	04-19-2013 12:37 AM Last Post: Jehale
	Is it possible for the med8er to read from HDDs connected to PCH A300 ?	djhifi	1	412	04-04-2013 02:35 AM Last Post: halfelite
	[A300] NAT port forwarding transmission password protection?	unbrained	3	640	03-27-2013 10:12 AM Last Post: unbrained
	No CIFS/SMB Access to Windows 2012 from C200/A300	Ryzz	22	7,804	03-16-2013 10:21 AM Last Post: ciao
	Network Basics - DHCP & Static IP/Synology NAS Setup	chris57	11	22,420	03-09-2013 07:15 PM Last Post: wilfried