NZBget is stuck on 'loading'

[Atinkler]

NZBget load up and it is stuck on loading
I cannot see any of the basic options because it wont fully load up
I can switch to mobile view but that is annoying...also I can't delete schedules as it it goes blank screen and I need to refresh via browser and the delete hasnt been registered
I've done all the usual things like reinstalling but no luck

[Slevin]

Is the cpu load on your PCH high?
Sometimes my a110 takes a lot of time when it is busy with torrents or SickBeard...
try the "uptime" or "top" command in Telnet

lately SickBeard seemed to be taking the responsiveness down..
I'm now trying to offload the cpu of my a110 by disabling SB and using the alternative provided by jasch.

[Atinkler]

(03-26-2012 09:26 PM)Slevin Wrote:  Is the cpu load on your PCH high?
Sometimes my a110 takes a lot of time when it is busy with torrents or SickBeard...
try the "uptime" or "top" command in Telnet

lately SickBeard seemed to be taking the responsiveness down..
I'm now trying to offload the cpu of my a110 by disabling SB and using the alternative provided by jasch.

Hi Slevin

I don't think that is the problem - I've had that before on the A-series but this is as if the main view off Nzbget is not available and its stuck on loading.
Now it seems as if I can't download anything now!
If I go to mobile view I can see all options and can click through to Config or refresh etc.. but on main menu I cannot see any of these options just the 'loading' sign at the bottom.. and now nothing D/L... new shows do appear but sit in the download line without anything happening.
What do the uptime and top commands do? and what are the full commands?

[Slevin]

Uptime just shows how long the popcornhour has been on,
and the load averages for the last 1, 5 and 15 minutes, like this:

Code:

/opt/sybhttpd/localhost.drives/HARD_DISK # uptime
20:41:34 up  9:30, load average: 0.35, 0.15, 0.11
/opt/sybhttpd/localhost.drives/HARD_DISK #

top is bigger, showing cpu load, memory usage and a lost of active processes (standard ordered by cpu%)
this screen refreshes every X seconds and can be exited using Ctrl C

[Atinkler]

sh-3.00# /opt/sybhttpd/localhost.drives/SATA_DISK # uptime
sh: /opt/sybhttpd/localhost.drives/SATA_DISK: is a directory

and

sh-3.00# /opt/sybhttpd/localhost.drives/HARD_DISK # uptime
sh: /opt/sybhttpd/localhost.drives/HARD_DISK: is a directory


Not sure how putty/telenet works but I'm guessing I'm not doing it right

---

So bit of a idiot moment - forgot to put my passwords etc! doh!!

Now D/Ling but still back to the annoying user interface - still on loading, no counter telling me when it'll refresh, and no details about the download at all!

Odd

[Atinkler]

Update

OK - so I have everything downloading fine and using oversight script everything is fine.

However, for some reason the Web UI just isn't working!

I thought I'd explain in a bit more detail what I can see.

Down the left hand side I can see:

NZBget version
Web interface

Option to swap to mobile view

Max download rate box

Loading.....

To the right hand side NOTHING is available

So, as you can see it pretty much useless


Has anyone else experienced this????

[Atinkler]

seriously.. Am I on my own here?

So how do I completely remove nzbget and reinstall it?

This is really annoying me

[moddigi]

Atinkler,

you know what, I had this EXACT same issue just last week, after months/years of faultless operation. I reinstalled NZBGet but it didn't resolve the problem. I suspected it was another service that might be conflicting or something so instead what I done was stop the 'local 0.1.8' opkg service and disabled its startup (via NMT CSI). NZBGet web seems to be working alright now, though weird how only recently local0.1.8 has affected nzbget?

---

[edit]looking a bit more in depth, it seems local opkg had an update recently to -nmt2 ... It seems this causes issues with NZBGet... mmm, shall have to mention it over in the local thread.

[Atinkler]

Moddigi great thinking local is the only thing I've added recently so I think you've got it..i was losing the plot!! Thanks for the help.