3D SBS C-200 - Epson TW9000

[riddle]

Does anyone known the best setting to use the PCH C-200 in combination with a Epson TW9000 over wirelessHD?
I’m trying to play some Half SBS 3D movies, but without much luck.
I’m running the FW version just before the Step stone version on my C-200.
The C-200 output is set to 1080@24.
The settings on the Epson are:
Signal menu >> 3D Setup

3D Display : on
2D-to-3D Conversion: off
3D Format: Side by Side
3D Depth: Medium

But the image gets distorted. Seems that the two images are not overlated correctly. Also the standerd Epson menu is not sharp anymore.

[eggoist]

Hi
I am using C200 with same projector and i have no problems at all

Everything works great in 3D and 2D over wirelessHD or HDMI cable

Does it look like that when you put 3d glasses on?

I was reading yesterday that you can upgrade your projector with new firmware V104. I bought mine in january so it has firmware 100.
You can download it from: http://ftp.epson.com/drivers/epson14639-FW104.zip
It seems that new models come with V106 so it might be available soon.

[riddle]

(08-07-2012 11:54 AM)eggoist Wrote:  Hi
I am using C200 with same projector and i have no problems at all

Everything works great in 3D and 2D over wirelessHD or HDMI cable

Does it look like that when you put 3d glasses on?

I was reading yesterday that you can upgrade your projector with new firmware V104. I bought mine in january so it has firmware 100.
You can download it from: http://ftp.epson.com/drivers/epson14639-FW104.zip
It seems that new models come with V106 so it might be available soon.

Thanks for your reply. Issue was solved a while ago. Seemed that my 3D glassed did not automatically turn on when pressing the 'on' button.
After several tries it suddenly worked. My unit is ISF calibrated. I think that upgrading the FW will undo this calibration.
Bu thanks for the download link.