[C-200] Firmware 03-04-120517-21-POP-408 (03-04-111220-21-POP-408) (23.05.2012)

[geekuix]

(06-22-2012 02:32 PM)deron Wrote:  Updated last night...

Dead hdd this morning.

Dammit...

my condolences

[artarus]

(06-16-2012 09:28 AM)son_fce Wrote:  I am meeting a big problem with C200. I just had a new ones. I updated the lastest firmware but unfortunately C200 couldnt detect my harddisk (1.5TB) but still dectect USB Flash (4G). I pluged that HDD to Popbox is okie .
Any one know about this problem, pls advise me!

Hi!

I've got a problem like that too. Because of the new firmware I suppose.

I've three HDD WD 2To:
- 2 with USB 2.0
- 1 with USB 3.0.

Since the new firmware, it's impossible to make working the two HDD 2.0 together. I've tried to change USB cable and electric cable... without result.

Any idea?

Thanks by advance

[thatotherguy]

Thanks, will try that. Funny enough it was working fine for the last 2 days and then today all of a sudden i really struggled to get it to connect to my wireless network. But I will try the factory reset tomorrow again. Thanks.

Peace!

(06-21-2012 09:54 PM)sanctrum Wrote:  

(06-21-2012 08:02 PM)thatotherguy Wrote:  I hope someone can help as my wife is not technically savvy and just wants things to work.

MY PCH is on wifi and since the upgrade to the latest firmware, when I switch the PCH on, I need to tweak the network settings each and every time just so that it can connect to my wireless network. Whether I keep it on DHCP or on a static IP, it doesn't connect automatically. The network settings will say "unknown". If I fiddle with the settings it will say "connected".

Can anyone please help! Thanks

Do another factory reset. Worked for my case. Managed to get WiFi working after 3 factory resets... Do know why as the settings were the same...

---

Thanks, will try that. Funny enough it was working fine for the last 2 days and then today all of a sudden i really struggled to get it to connect to my wireless network. But I will try the factory reset tomorrow again. Thanks.

Peace!

(06-21-2012 09:54 PM)sanctrum Wrote:  

(06-21-2012 08:02 PM)thatotherguy Wrote:  I hope someone can help as my wife is not technically savvy and just wants things to work.

MY PCH is on wifi and since the upgrade to the latest firmware, when I switch the PCH on, I need to tweak the network settings each and every time just so that it can connect to my wireless network. Whether I keep it on DHCP or on a static IP, it doesn't connect automatically. The network settings will say "unknown". If I fiddle with the settings it will say "connected".

Can anyone please help! Thanks

Do another factory reset. Worked for my case. Managed to get WiFi working after 3 factory resets... Do know why as the settings were the same...

[makko]

(06-22-2012 02:32 PM)deron Wrote:  Updated last night...

Dead hdd this morning.

Dammit...

http://www.nooooooooooooooo.com/

[gjrhine]

Is it safe to upgrade with this firmware with a pretty basic system - HD, USB, HDMI, no networking?

[accident]

(06-24-2012 02:40 PM)gjrhine Wrote:  Is it safe to upgrade with this firmware with a pretty basic system - HD, USB, HDMI, no networking?

If your happy with how your c200 works now, wait a couple more weeks. There was some major bugs found after release and syabas is actively working on them. they are down to 1 more they need to fix and as soon as that is done, it'll be out.

[gjrhine]

And that will be a replacement release rather than needing the current one installed?

[accident]

correct.

[gjrhine]

okey doke !

[golti]

Hi,
.ts files (MPEG-TS) does not play after firmware update.
Please advice.

Media Info given below:

General
ID : 3221 (0xC95)
Complete name : M:\aaaaaaaaaaaaaa.ts
Format : MPEG-TS
File size : 1.80 GiB
Duration : 22mn 32s
Overall bit rate : 11.5 Mbps

Video
ID : 4008 (0xFA8)
Menu ID : 5064 (0x13C8)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.0
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=3, N=30
Codec ID : 27
Duration : 22mn 32s
Bit rate : 10.1 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Bits/(Pixel*Frame) : 0.195
Stream size : 1.59 GiB (88%)

Audio #1
ID : 4168 (0x1048)
Menu ID : 5064 (0x13C8)
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 2
Codec ID : 3
Duration : 22mn 32s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Delay relative to video : 10ms
Stream size : 31.0 MiB (2%)
Language : English

[Face]

Golti,

Do you just get a black screen when you play your .ts files?

i do get a black screen, but if i press 0 on the remote, the .ts file starts playing from the beginning with perfect audio and sound.

All other formats work ok for me.

Face

[pikachu2000]

MAC Adress: 00: 06: DC: 81: DA: 18
Hello i tried to flash the C200 23/05/2012 firmware, it failed and showed me ERR064:217, according to the forum, please Reset my Mac Adress

[accident]

Over a year ago, posting in the forum was correct. Now you need to open a support ticket

[pikachu2000]

(06-26-2012 06:51 AM)accident Wrote:  Over a year ago, posting in the forum was correct. Now you need to open a support ticket

Have created case already.

[Dzsoni]

Hy

I intalled this new firmware. But I started an mp3, then screensaver not working. I hope you will fix the problem.