Denon AVR-1911 / PCH C200 HDMI issue

[riddle]

Ben sinds een weekje volledig over naar HDMI.
Since a couple of days I changed my complete HT setup to HDMI

Setup is as following:

POPCORN C200---hdmi1-----|Denon AVR-1911|

DIGI-TV-decoder-------hdmi3----|Denon AVR-1911|

|Denon AVR-1911 |-----hdmi out----| HDMI splitter |--- |TW9000W (W-HDMI)
|Denon AVR-1911 |-----hdmi out----| HDMI splitter |--- | Panasonic 42ST50

Problem:

I'm experiencing frequent audio and video dropout using the PCH C200. On the PJ and on the TV.
Dropouts are about 3 seconds because the WirelessHDMI needs to reconnect after the connection loss.
The frequency of the dropouts is very irregular.
Yesterday about 2-3 minutes. Now he has been playing without dropouts for a minute or 15.

Occurs when watching MKV / DVD ISO / DVD retail disc using built in BR.

Actions that I have already taken:
- Connect HDMI to different outputs on the AVR (even worse)
- Factory reset of the AVR (no result)
- Installed latest online FW update of the PCH
- PCH connected directly to PJ --> no problem.
- PCH connected directly to TV--> no problem.

To do:
- Buy a new HDMI cable.

Probleem lijkt me in de AVR te zitten. Van het toestel kan ik geen FW update vinden.
Problem seems to be in the AVR. I cannot find a FW update for the Denon AVR-1911

Sound familiar to someone?

Kind Regards.

[geekuix]

(07-07-2012 09:12 AM)riddle Wrote:  Ben sinds een weekje volledig over naar HDMI.
Since a couple of days I changed my complete HT setup to HDMI

Setup is as following:

POPCORN C200---hdmi1-----|Denon AVR-1911|

DIGI-TV-decoder-------hdmi3----|Denon AVR-1911|

|Denon AVR-1911 |-----hdmi out----| HDMI splitter |--- |TW9000W (W-HDMI)
|Denon AVR-1911 |-----hdmi out----| HDMI splitter |--- | Panasonic 42ST50

Problem:

I'm experiencing frequent audio and video dropout using the PCH C200. On the PJ and on the TV.
Dropouts are about 3 seconds because the WirelessHDMI needs to reconnect after the connection loss.
The frequency of the dropouts is very irregular.
Yesterday about 2-3 minutes. Now he has been playing without dropouts for a minute or 15.

Occurs when watching MKV / DVD ISO / DVD retail disc using built in BR.

Actions that I have already taken:
- Connect HDMI to different outputs on the AVR (even worse)
- Factory reset of the AVR (no result)
- Installed latest online FW update of the PCH
- PCH connected directly to PJ --> no problem.
- PCH connected directly to TV--> no problem.

To do:
- Buy a new HDMI cable.

Probleem lijkt me in de AVR te zitten. Van het toestel kan ik geen FW update vinden.
Problem seems to be in the AVR. I cannot find a FW update for the Denon AVR-1911

Sound familiar to someone?

Kind Regards.

Try setting resolution to 1080p@50hz and NTSC/24p for framerate sync, mine was working like this if i set 1080p@60hz and NTSC/PAL/24p i have dropout issues

[riddle]

Changed the settings yesterday evening and ... It works! No audio and no video drop outs. Thanks a lotl