[C-300] Firmware 05-02-120710-23-POP-420 (05-02-111220-23-POP-420) (10.07.2012)

[Talosia]

(07-12-2012 05:19 PM)accident Wrote:  

(07-12-2012 04:51 PM)Talosia Wrote:  From what I can see theres stilla problem with vobsub in MKV. When I play the movie on my C200 the subtitles works fine but on C300 nothing is displayed. throught this build would fix this ??

it doesn't say fixed in the release notes.

Yeah sorry. But it looks like I ahve a bigger problem now than only vobsub.

since this update + NMT update I cannot get any subtitles on my c300 whatsoever

External srt on both AVI and MKV shows nothing. and Ive tested on movies and srt's i know worked before the updates. any idea what to do ?

[halfelite]

did you try a factor reset. sometimes factor resets fix everything also make sure the subs are not off the screen or something.

[anyone]

(07-10-2012 10:53 PM)geerten Wrote:  I upgraded the firmware, but now I cannot upgrade the NMT apps because of connection failure.
I reinstalled the network a couple of times, sometimes successfully, but even so the download stops with "some error occurred".
Is this server overload at the PCH end ?

I cant get to nmt apps either it always says connection failure? I never had this problem with my c-200? Don't know if it did it from new or when i updated the firmware as i updated firmware as soon as i swithed on my c-300, i've even downloaded the firmware to usb just in case it was corrupted over the direct download root? Has anyone managed to connect to apps since updating firmware?

[Talosia]

(07-12-2012 07:37 PM)halfelite Wrote:  did you try a factor reset. sometimes factor resets fix everything also make sure the subs are not off the screen or something.

no I havent tried that. How do you do that ?

[halfelite]

go under setup and maintence i think. but be warned it will wipe out all your settings. so if you have shares and things setup maybe write everything down before you do it.

[chris57]

@ anyone:

Use a USB stick and install the Apps that way:-
http://files.syabas.com/popcornhour/firm...20-000.zip

Unpack the file and place the apps.nmt on a USB stick. Insert that into the player and then go to Settings > Maintenance > NMT SEtup Wizard. I think it should then recognise that you have a new version on a USB stick and ask if you want to update.

Use a download manager and the PCH website to update. It's far quicker to do the manual update via USB then wait for the online when a firmware has just been released.

[Myg]

a lot of bugs are fixed, it is a good thing.

BUT !!!!!!!!!!!!!!!!!

but the basic is the minimum to be able to read dvd iso... now it is not possible !!!

direct access to file/folder with number touch = not possible
change samba password with not numeric or numeric character = not possible
save the settings in a file = not possible
reset the factory default so often after upgrade = not comprehensible
not possible to see if pch is or not switch on/off (3colors as c200) = not implemented
choose the number of lines in file mode explorer (c300 = 11, c200 = 15) => regression
choose character height in file mode
display all files if i want... if subtitles files are present.... => like c200 or A110.
list of files too slow (straight nas in 1gb/s network) = pause every 2 or 3 secunds. why ?

etc !!!
what catastrophic nmt this c300...

4 months to regression is

edit: DVD Iso playing works fine now. I switch off totally my nmt c300. And switch on after a few second. After "reboot", it works normally.

[Filminator]

(07-12-2012 07:45 PM)anyone Wrote:  I cant get to nmt apps either it always says connection failure? I never had this problem with my c-200? Don't know if it did it from new or when i updated the firmware as i updated firmware as soon as i swithed on my c-300, i've even downloaded the firmware to usb just in case it was corrupted over the direct download root? Has anyone managed to connect to apps since updating firmware?

I had the same problem and I tried everything, changing from automatic to manual and back, nothing helped. Finally I went through the setup wizard again, I didn't change anything, just using the green button to get through. It said connection works and afterwards the nmt apps update worked fine.

The clock still doesn't show the right time and the apps market says can't connect to server (no proxy involved) but the nmt apps update worked.

Looks to like there's a new big bug with internet connections
Hopefully we don't have to wait 5 month for a fix ...

[Martien]

(07-12-2012 09:00 PM)Filminator Wrote:  

(07-12-2012 07:45 PM)anyone Wrote:  I cant get to nmt apps either it always says connection failure? I never had this problem with my c-200? Don't know if it did it from new or when i updated the firmware as i updated firmware as soon as i swithed on my c-300, i've even downloaded the firmware to usb just in case it was corrupted over the direct download root? Has anyone managed to connect to apps since updating firmware?

I had the same problem and I tried everything, changing from automatic to manual and back, nothing helped. Finally I went through the setup wizard again, I didn't change anything, just using the green button to get through. It said connection works and afterwards the nmt apps update worked fine.

The clock still doesn't show the right time and the apps market says can't connect to server (no proxy involved) but the nmt apps update worked.

Looks to like there's a new big bug with internet connections
Hopefully we don't have to wait 5 month for a fix ...

As a workaround select Manual for DHCP settings. Boot again.
I have the same issue. Has to do with the router. Mine is Cisco/Linksys E4200. Seems "not compatible" with PCH300.

[Filminator]

(07-12-2012 09:44 PM)Martien Wrote:  As a workaround select Manual for DHCP settings. Boot again.
I have the same issue. Has to do with the router. Mine is Cisco/Linksys E4200. Seems "not compatible" with PCH300.

I have a fritzbox and it worked with the last firmware, so they broke something that was working before. It still works a bit, For the apps in the marked I have installed, the ARTE-7 App and the ZDF-Mediathek I get the list of todays clips, so there's a connection, but it seems that bigger stuff is not working.
I'll try manual, but I'm not sure if my fritzbox will like that

I tried manual and the network seems to work now (after the reboot), so not the complete network capabilities are broken, only DHCP ...

[halfelite]

they have had issues before where if your router only sends one dns address its messes things up as a work around try settings manual dns address see if it works.

[Filminator]

(07-12-2012 09:52 PM)halfelite Wrote:  they have had issues before where if your router only sends one dns address its messes things up as a work around try settings manual dns address see if it works.

nope, even with automatic, it gets the ip address, correct settings and two DNS servers, still doesn't work but it works with the exact same addresses when set to manual

[MALmen]

Is the PSG subtitle sync fixed?

[mukkino1]

Wow finalliy we have it... starting to upgrade!

[Bassman]

Since this 05-02-120710-23-POP-420-000 update all my DVD rips ( Video_TS) folders playing cut off the signal to my TV. I only see "no signal" while the front display of the C300 says it's playing.

I've seen a lot of posts concerning this issue, but none cover my problem.
- I tried video setting " auto "
- I tried video setting 1080P 60Hz
- I tried bypassing my receiver, thus HDMI directly to TV
- I tried another HDMI cable
- I tried the setting overscan/underscan

HOW CAN I GET BACK TO THE PREVIOUS FIRMWARE? I DISLIKE THIS UPDATE CRIPPLING MY C300 !!!