Philips PRONTO

[human]

I have the c300 and it came withe a radio controled remote.
To copy this one to my Pronto remote is not possible it reeds only IR codes!
On remote central there is one for the 200 but does'nt work.
Wat do you suggest as solution please.
Thanks in advance.
Regards.

[accident]

try the a110 codes. All syabas ir remotes use exactly the same codes.

http://files.remotecentral.com/philipsng...index.html

I did find some other threads here about the pronto and a couple people talked about buying an ir remote to teach the pronto the codes. perhaps none of the codes on the website are correct.

[human]

I will try this one also and let you know if it works.
Thank you

[chris57]

In the WIKI:
http://www.networkedmediatank.com/wiki/i..._Code_list
http://www.remotecentral.com/cgi-bin/fil...a-a110.zip

[human]

Thank you, but it is not working.
I tryed both IR and RF.
Is it possible that there is no IR detector on the c300?

[chris57]

There are both IR and RF in the C300.

[human]

It doesn't respond on IR !
The RF receiver seems to react to the Pronto ( A red led flashes )
I have to test it further.
Thankx anyway.

Kind regards

[chris57]

It shouold respond to IR, i dont have a C300 but when ive asked about the remote both IR and RF are active at the same time. There's no menu option or anything IIRC.

[accident]

i don't have a c300 but maybe pull out the batteries from the RF remote and power cycle the c300 to see if maybe the ir is disabled if the remote is found.

just a guess.

[human]

No nothing happens, I don't think that the codes from the A110 can work on the c300.
I tryed all the trics mentioned.
May be buying a IR remote for the C300 and then copying the keys.
Wher can i find one for the C300?
Thank you guys.

[Wildcard30]

I don't have a C300 but do have an A300 which I use my Philips Pronto without any problem I have been using it for years with my A110, A200 and C200 never had a problem.

[accident]

I think you should contact support at this point.. We know for a fact that all remote control codes in all models are exactly the same. There's users with harmony remotes setup for 100 and 200 series IR remotes using it just fine int he C300. I have to think there is another problem here.

[chris57]

Yep I'm using my A100 remote with my A300.

[human]

Mr. Wildcard 30, can you send me your pcf file please.
The one from your Pronto, that is working with your A300.
Thank you a lot

[chris57]

Send him a PM if he does not see your post.