[YAMJ] Help

[Mr.Dman]

Hello,
First post here goes I have a whs server that was setup with YAMJ using Damion's guide posted here on the forum
With an A 200 and a A110 Well my hard drive crashed in my server.

I replaced it and installed yamj again been trying for a week to get it to work with just my A 200 I can't play a movie from yamj but i can from the folder where the movie is.

So today started all over deleted junkbox yamj files reinstalled everything
but added my A110 also.
Well the 110 plays the movie but the A 200 still does not.
On the A 200 I have been holding the power off button to hard reboot it, also I have been pulling the plug to.

Here is my XML file
<!-- Library file generated by Omertron's GUI Config
-->
- <!-- YAMJ GUI Config v0.51
-->
- <!-- //mediaplayersitedotcom/YAMJ_GUI_Config
-->
- <libraries>
- <library>
<path>\\\\Hpstorage2\Videos</path>
<playerpath>file:///opt/sybhttpd/localhost.drives/NETWORK_SHARE/HPSTORAGE2:shares/</playerpath>
<exclude name="sample,tmp/,temp/,RECYCLER/,RECYCLE.BIN/" />
<description />
<prebuf />
<scrapeLibrary>true</scrapeLibrary>
</library>
- <library>
<path>\\\\Hpstorage2\Videos</path>
<playerpath>file:///opt/sybhttpd/localhost.drives/NETWORK_SHARE/HPSTORAGE2:Videos/</playerpath>
<exclude name="sample,tmp/,temp/,RECYCLER/,RECYCLE.BIN/" />
<description />
<prebuf />
<scrapeLibrary>true</scrapeLibrary>
</library>
</libraries>

Thanks for looking
Tom

[Omertron]

If it works on the A110 then the path is correct for the share on the A110 and not on the A200
Make sure the share on the A200 is EXACTLY the same down to the capitalisation of the share name, in your case
HPSTORAGE2 in all caps.

Why do you have two entries in the library file?

[Mr.Dman]

I will look at the network share on my A200 tonight at work right now.

On the libarary file I think I saved the file then added the a 110 to it

[Mr.Dman]

Omertron,
I looked at my network share on the A-200 I did have it wrong I have been trying for a week didn't even see it.
I changed it now everything works great!
I do need to fix the Library file thanks for pointing that out.

Have a great day!

Thanks for your help Tom

[Omertron]

No problems, glad it's working