NZBGet 9.0/10.0 discussion

[chris57]

I'm thinking it must be a permissions issue as it worked when I first set it up, it downloaded onto the root of the SSD. Could the fact that I want it to download into the root rather than a folder be the cause?

Not at home presently so can't try anything telnet.

My .home theme is still working fine and that has a path in it with "/opt/sybhttpd/localhost.drives/SSD'.

I changed recently from lower case ssd to SSD after reformtting my ssd. So I had to go into my /home theme and change all of the paths in there from lower to upper case.

Thinking I may need to drop a line in start_app.sh or something.

edit:
Noticed that I do get a nzbget.txt file placed on the root of the SSD

Ran the .home them line and got:_
/opt/sybhttpd/localhost.drives/SATA_DISK_deef27d1-dcf7-b0af-e0c1-39b4e807d41b1

so trying that with a trailing '/'

[hugbug]

Also check option DaemonUserName and try set it to root.
The option however has effect only if the program is started by root.

The question is from what account NZBGet is started when the device loads?

[chris57]

DaemonUser is set to Root in options I remember that.

I was wondering if changing it to 'nmt' may help.

I can telnet in to the box but I'll need to know exactly what to then enter for anything further. What would I need to enter to find out what user is requesting to create the download folder on SSD?

I tried 'chmod -R 777 SSD' to SSD. That didn't work.

[chris57]

Right put this in the DestDir:-
/opt/sybhttpd/localhost.drives/SATA_DISK_deef27d1-dcf7-b0af-e0c1-39b4e807d41b1/

It's received the pushed files and is now downloading.

Wonder if it'll last a reboot

[say170]

I installed nzbget-9.0-testing-r455-bin-nmt100-mipsel.tar on my A110 a while ago. I had some problems today and had a couple of questions...

Are nzb files kept now? If I look in /share/.nzbget/nzb, I can only see files prior to the upgrade. If they're not there, where?

Can I upgrade? CSI doesn't offer me 10.x. On sourceforge, I can find nzbget-9.0-testing-r518-bin-nmt100-mipsel.tar, but all later releases don't have nmt100 in.

Thanks

[Damester24]

Hi say170

I have an A300 and I upgraded from NZBGet 0.7 to 10, since then I found the nzb's are either kept in the same location as where the files are downloaded e.g. share/Complete/Movies/<Movie name>/*.nzb or in the typical (as you mentioned) share/Apps/NZBget/.nzbget/*.nzb.

I have the option in CSI to upgrade to NZBget 10.1-Stable but I have installed 11.0 from a link I grabbed, which you should be able to fnd.
You would need to check with JHMiller maybe to confirm A110 support

[jhmiller]

(05-17-2013 05:10 PM)Damester24 Wrote:  Hi say170

I have an A300 and I upgraded from NZBGet 0.7 to 10, since then I found the nzb's are either kept in the same location as where the files are downloaded e.g. share/Complete/Movies/<Movie name>/*.nzb or in the typical (as you mentioned) share/Apps/NZBget/.nzbget/*.nzb.

I have the option in CSI to upgrade to NZBget 10.1-Stable but I have installed 11.0 from a link I grabbed, which you should be able to fnd.
You would need to check with JHMiller maybe to confirm A110 support

CSI has 10.1 for all nmt players, if its not showing in CSI then you need to update CSI (see my sig)

I have done packages for both 10.2 and 11.r465(?) but not added to CSI yet.

[jhmiller]

Updated CSI with nzbget_10.2-stable and nzbget_11.0-testing-r648.

When updating from an exsisting CSI nzbget install it is advised to click on settings and to then click save all changes, finally click Reload. This will ensure you have no old incompatible settings left in your configuration file.

[say170]

Thanks. I got 10.1 working (and now installing 10.2).

10.1 did something weird though.. it downloaded all my files but didn't unpack them. The postprocessing script wasn't installed. I changed the path to point to the one in Apps/NZBget/.nzbget was that right?