Sd toolchain

From NMTWiki

Contents 1 Commands to make your own Sigma Designs toochain 1.1 Get and unpack source 1.2 Configure 1.3 Compile

Commands to make your own Sigma Designs toochain

Get and unpack source

wget http://www.networkedmediatank.com/download/firmware/nmt/gpl/smp86xx_toolchain.20080505.tar.bz2
tar -xjsf smp86xx_toolchain.20080505.tar.bz2
cd smp86xx_toolchain.20080505

Configure

To configure your toolchain you need to have flex and genromfs utilities installed. Consult your system manual about this. At ubuntu that will be -

sudo apt-get install flex
sudo apt-get install genromfs

Then configure

make menuconfig

Only configuration option I changed was Toolchain options -> Enable locale/gettext/i18n support

Compile

make

At compile time some uclic configuration is requested. Set everything to default options.